Translations:Интеграция SmartPlayer с ivideon/2/en

Adding a device to the ivideon personal account

On the main page, the user will be prompted to add a device via a special button in the center of the screen - "Connect Device."

Example of the "Connect Device" button displayed in the ivideon user personal account

By clicking the "Connect Device" button, the user will open a list where they need to select the desired device. In this case, it's an IP camera.

Example of the list of available devices for connection in the ivideon user personal account

Next, the user is advised to choose the connection method for the IP camera. ivideon technical support specialists strongly recommend using a wired "Ethernet" connection.

Example of the types of camera connections in the ivideon user personal account

At this stage, the user will be asked to provide the device's serial number. If the user does not have this information, it is possible to register the device using the MAC address. By clicking on the special line "Use MAC address," the user will be redirected to a new registration window.

Example of registering a device via serial number and displaying the line for registration via MAC address

In the opened registration window, the user needs to enter the MAC address of the device, which can be found on the device itself (IP camera) or on the box in which the device was packaged upon purchase.

Example of registering a device via MAC address

After entering the MAC address and clicking the "Continue" button, the user's camera will be registered and displayed in their personal account.

Using the camera's web interface for configuration

Manufacturers of various cameras provide an internal interface for configuring the camera. To access it, a certain sequence of steps must be followed.
First, the user needs to go to the "Settings" section in the ivideon personal account and proceed to the "Security" category.

Example of the "Settings" section and the "Security" category in the ivideon personal account

In this category, the user can change the camera password and set the desired one if they do not know it.

Example of the line for changing the device password

Next, proceed to the camera information section. To do this, the user needs to click on the three vertical dots in the window of the registered camera and open the list of options for interacting with the camera. In this list, the user selects the line "Camera Information."

Example of the "Camera Information" line in the ivideon personal account

In the opened window, information about the camera will be provided. At the bottom of the window, there will be the required block "IP Address" with the line "eth 0". The needed IP address will be listed in this line.

Example of the camera's IP address displayed in the ivideon personal account

This IP address is copied and pasted into the browser's address bar to open the camera's settings interface. The opened page will require login credentials for the camera. After this, in the camera's web interface, go to the "Configuration" section and enable the setting or checkbox for "Enable motion detection."

Limitation: The camera must support the setting for detecting object crossing of a zone; otherwise, the previously mentioned "Enable motion detection" setting may be unavailable in the camera's web interface. An example of a camera that supports the zone-crossing detection setting can be found [here](https://www.dssl.ru/products/ds-2cd2183g2-is-2-8-mm-ip-kamera/). ivideon technical support specialists are always available to assist users with camera settings.

Some cameras also offer the option to record and store logs. For this purpose, the camera is equipped with the ability to insert a USB-flash drive. Logs can also be viewed in the camera's web interface (this feature is not available on all devices).