Инструкция по установке SmartPlayer на устройство Colorlight A35/en: различия между версиями

Материал из SmartPlayer
(Новая страница: « Sure, here is the translation: === '''Step 2: Updating the Player''' === Download the update [https://drive.google.com/file/d/1tbgypvfb5yheCZKYZLGoEAn7qukl6AuL/view?usp=drive_link update_a35_v1.71.5. ]<br> For further actions, you need to install the "Player Master" program. Open the program and click on the button indicated in the screenshot below. thumb|center| Example of the required icon in Player Master |800px Se...»)
(Новая страница: «=== '''Step 5: Returning to Player Master and Waiting for the Device Registration Code''' === The user returns to the Player Master program and waits for the registration code to appear. thumb|center| Returning to Player Master |800px Once the registration code appears, the setup of the Colorlight A 35 player is complete. File:Код_регистрации.png|thumb|center| Receiving the registration code and completing the setup |800...»)
 
(не показаны 3 промежуточные версии этого же участника)
Строка 16: Строка 16:
Initially, connect the player to the PC/laptop using a USB cable.
Initially, connect the player to the PC/laptop using a USB cable.
[[File:подключение по usb.png|thumb|center| Example of connecting the player via USB |800px]]
[[File:подключение по usb.png|thumb|center| Example of connecting the player via USB |800px]]
Sure, here is the translation:
=== '''Step 2: Updating the Player''' ===
=== '''Step 2: Updating the Player''' ===
Download the update [https://drive.google.com/file/d/1tbgypvfb5yheCZKYZLGoEAn7qukl6AuL/view?usp=drive_link update_a35_v1.71.5. ]<br>
Download the update [https://drive.google.com/file/d/1tbgypvfb5yheCZKYZLGoEAn7qukl6AuL/view?usp=drive_link update_a35_v1.71.5. ]<br>
Строка 33: Строка 30:
{{Note|There is an option to connect the player via Wi-Fi, and it will work if the interaction occurs within the same network.|warn}}
{{Note|There is an option to connect the player via Wi-Fi, and it will work if the interaction occurs within the same network.|warn}}
[[File:Подключение к свитч роутеру.png|thumb|center| Connecting to a switch-router |800px]]
[[File:Подключение к свитч роутеру.png|thumb|center| Connecting to a switch-router |800px]]
<div lang="ru" dir="ltr" class="mw-content-ltr">
=== '''Step 3: Setting up the Device Using the Player Master Program ''' ===
=== '''Шаг 3: Настройка устройства с помощью программы Player Master ''' ===
After completing the steps above, the Colorlight player will be recognized in the Player Master program.
После описанных выше шагов плеер Colorlight определиться в программе Player Master.  
[[File:определение устройства.png|thumb|center| Device recognized in the Player Master program |800px]]
[[File:определение устройства.png|thumb|center| Устройство определилось в программе Player Master |800px]]
You need to select the device (enter it within the program) and set the time zone.
Необходимо выделить устройство (зайти в него внутри программы) и выставляем тайм-зону.  
[[File:Выставление тайм-зоны.png|thumb|center| Setting the time zone in the Player Master program |800px]]
[[File:Выставление тайм-зоны.png|thumb|center| Выставление тайм - зоны в программе Player Master |800px]]
Next, go to the "Program" section and create a playback zone.
Далее необходимо зайти в раздел "Program" и создать зону воспроизведения.  
[[File:создание воспроизведения.png|thumb|center| Creating a playback zone |800px]]
[[File:создание воспроизведения.png|thumb|center| Создание зоны воспроизведения |800px]]
In the next step, the content zone will open. You need to add any file.
Следующим шагом откроется зона контента. Нужно добавить любой файл.
[[File:переход в зону контента.png|thumb|center| Display of the opened content zone |800px]]
[[File:переход в зону контента.png|thumb|center| Отображение открывшейся зоны контента |800px]]
Stretch this file to fill the entire zone and send it for publication.
Растягиваем данный файл на всю зону и отправляем на публикацию.
[[File:Публикация_контенат.png|thumb|center| Sending content for publication |800px]]
[[File:Публикация_контенат.png|thumb|center| Отправление контента на публикацию|800px]]
A message will appear indicating the successful installation.
После появится сообщение об успешной установке.
[[File:успешная установка.png|thumb|center| Notification of successful installation |800px]]
[[File:успешная установка.png|thumb|center| Уведомление об успешной установке|800px]]
Exit the editor and check the playback in Player Master.
Необходимо выйти из редактора и проверить воспроизведение в Player Master.
[[File:Проверка проигрывания в плеер.png|thumb|center| Checking playback |800px]]
[[File:Проверка проигрывания в плеер.png|thumb|center| Проверка воспроизведения|800px]]
Go to the DIVICE menu, select CCT, and then go to Return.
Переходим в меню DIVICE и выбираем CCT и впоследствии переходим в Return.  
[[File:Шаги_действия.png|thumb|center| Order of actions |800px]]
[[File:Шаги_действия.png|thumb|center| Порядок действий|800px]]
The final step is to receive a notification that everything has been installed correctly.
Финальным шагом получаем оповещение о том, что все установлено корректно.
[[File:корректная установка.png|thumb|center| Completion of the installation |800px]]
[[File:корректная установка.png|thumb|center| Завершение установки|800px]]
=== '''Step 4: Setting up the Device Using the cloudSmart Program''' ===
</div>
Open the cloudSmart program.
<div lang="ru" dir="ltr" class="mw-content-ltr">
[[File
=== '''Шаг 4: Настройка устройства с помощью программы cloudSmart''' ===
.png|thumb|center| The cloudSmart program |800px]]
Открываем программу cloudSmart.
Switch the language to English for easier interaction with the program.
[[File:Cloudsmart.png|thumb|center| Программа cloudSmart|800px]]
[[File:переключение на English.png|thumb|center| Switching the language to "English" |800px]]
Переключаем язык на Английский, для более удобного взаимодействия с программой.
Next, the user selects the "install app" option.
[[File:переключение на English.png|thumb|center| Переключение языка на "English"|800px]]
[[File
Дальше пользователь выбирает пункт "install app".
.png|thumb|center| "Install app" option |800px]]
[[File:Install_app.png|thumb|center| Пункт "Install app"|800px]]
In the next step, a window will open to select the APK file of the SmartPlayer application.
Следующим шагом откроется окно для выбора APK - файла приложения SmartPlayer.
[[File
[[File:APK файл.png|thumb|center| Выбор APK - файла для установки приложения|800px]]
файл.png|thumb|center| Selecting the APK file for installation |800px]]
После выбора нужного APK - файла и его установки появится сообщение об успешной установки.
After selecting the necessary APK file and its installation, a message will appear indicating successful installation.
[[File:Сообщение об успешной установке.png|thumb|center| Сообщение об успешной установке|800px]]
[[File:Сообщение об успешной установке.png|thumb|center| Message indicating successful installation |800px]]
</div>
=== '''Step 5: Returning to Player Master and Waiting for the Device Registration Code''' ===
<div lang="ru" dir="ltr" class="mw-content-ltr">
The user returns to the Player Master program and waits for the registration code to appear.
=== '''Шаг 5: Возвращение в Player Master и ожидание получения кода регистрации устройства''' ===
[[File:comeback.png|thumb|center| Returning to Player Master |800px]]
Пользователь возвращается в программу Player Master и ожидает появления кода  регистрации.
Once the registration code appears, the setup of the Colorlight A 35 player is complete.
[[File:comeback.png|thumb|center| Переход в программу Player Master|800px]]  
[[File:Код_регистрации.png|thumb|center| Receiving the registration code and completing the setup |800px]]
После появления кода регистрации настройка плеера Colorlight A 35 завершена.
== '''Instructions for Resetting the Colorlight A 35 Device to Factory Settings''' ==
[[File:Код_регистрации.png|thumb|center| Получение кода регистрации и завершение установки|800px]]
Resetting the Colorlight A 35 device involves the following steps:
== '''Инструкция по сбросу до заводских настроек устройства Colorlight A 35''' ==
# Use any USB flash drive with a capacity of 4-8 GB.
Сброс устройства Colorlight A 35 подразумевает под собой следующие шаги:  
# Format it to FAT-32 format.
# Использовать любой USB-флэш накопитель объёмом 4-8 ГБ
# Name the USB flash drive: ''"RESETFACT"''
# Отформатировать ее в формат FAT-32
# Insert the USB flash drive into the player.
# Назвать данный USB-флэш накопитель: ''"RESETFACT"''
# Reboot the player.
# Вставить данные USB-флэш накопитель в плеер
# When the player sound appears, you can remove the USB flash drive from the device.
# Перезагрузить плеер
# The device will restore factory settings.
# При появлении звука проигрывателя от плеера можно отключить USB-флэш накопитель от устройства
# Устройство восстановит заводские настройки
</div>

Текущая версия от 09:23, 3 июля 2024

Situation Description

The SmartPlayer platform supports interaction with various devices running different operating systems. Some devices do not require additional manipulations to install SmartPlayer, but there are certain devices that do not launch SmartPlayer when following the standard installation algorithm. One of these "unusual" devices is the Colorlight A35.

Required Software for Configuration

To install SmartPlayer software on the Colorlight A35 player, two programs are needed:

  1. PlayerMaster
  2. cli cloudSmart

Link to the repository with installation files

Action Algorithm

  • Connect the Colorlight A35 player via USB
  • Update the player
  • Configure the device using the Player Master program
  • Configure the device using the cloudSmart program
  • Return to Player Master and wait for the device registration code

Below is a more detailed description of each step.

Step 1: Connecting the Colorlight Player via USB

Initially, connect the player to the PC/laptop using a USB cable.

Example of connecting the player via USB

Step 2: Updating the Player

Download the update update_a35_v1.71.5.
For further actions, you need to install the "Player Master" program. Open the program and click on the button indicated in the screenshot below.

Example of the required icon in Player Master

Select the update file in the compressed "ZIP" format.

Example of the update archive in ZIP format

Then monitor the update progress.

Example of the update progress display

Next, wait for 3-5 minutes, and the player will restart. Connect the LAN cable (internet cable) to the player.

The LAN cable must be connected to a common network with internet access or the network where the software will be deployed. The PC and device must be on the same network.
Connecting the LAN cable

Another action is to connect the cable to a switch-router so that both devices are on the same network.

There is an option to connect the player via Wi-Fi, and it will work if the interaction occurs within the same network.
Connecting to a switch-router

Step 3: Setting up the Device Using the Player Master Program

After completing the steps above, the Colorlight player will be recognized in the Player Master program.

Device recognized in the Player Master program

You need to select the device (enter it within the program) and set the time zone.

Setting the time zone in the Player Master program

Next, go to the "Program" section and create a playback zone.

Creating a playback zone

In the next step, the content zone will open. You need to add any file.

Display of the opened content zone

Stretch this file to fill the entire zone and send it for publication.

Sending content for publication

A message will appear indicating the successful installation.

Notification of successful installation

Exit the editor and check the playback in Player Master.

Checking playback

Go to the DIVICE menu, select CCT, and then go to Return.

Order of actions

The final step is to receive a notification that everything has been installed correctly.

Completion of the installation

Step 4: Setting up the Device Using the cloudSmart Program

Open the cloudSmart program. [[File .png|thumb|center| The cloudSmart program |800px]] Switch the language to English for easier interaction with the program.

Switching the language to "English"

Next, the user selects the "install app" option. [[File .png|thumb|center| "Install app" option |800px]] In the next step, a window will open to select the APK file of the SmartPlayer application. [[File файл.png|thumb|center| Selecting the APK file for installation |800px]] After selecting the necessary APK file and its installation, a message will appear indicating successful installation.

Message indicating successful installation

Step 5: Returning to Player Master and Waiting for the Device Registration Code

The user returns to the Player Master program and waits for the registration code to appear.

Returning to Player Master

Once the registration code appears, the setup of the Colorlight A 35 player is complete.

Receiving the registration code and completing the setup

Instructions for Resetting the Colorlight A 35 Device to Factory Settings

Resetting the Colorlight A 35 device involves the following steps:

  1. Use any USB flash drive with a capacity of 4-8 GB.
  2. Format it to FAT-32 format.
  3. Name the USB flash drive: "RESETFACT"
  4. Insert the USB flash drive into the player.
  5. Reboot the player.
  6. When the player sound appears, you can remove the USB flash drive from the device.
  7. The device will restore factory settings.
Источник — https://wiki.smartplayer.org/index.php?title=Инструкция_по_установке_SmartPlayer_на_устройство_Colorlight_A35/en&oldid=13091