BrightSign OS/en: различия между версиями

Материал из SmartPlayer
(Новая страница: «All modern players come with firmware [https://www.brightsign.biz/downloads/overview%20BrightSign 8.x.x] and are supported by SmartPlayer. The application can onl...»)
(Новая страница: «== Updating the application manually == 1. Disconnect the power from the device and remove the microSD from the device <br> 2. Rename folder to MircoSD sp_app to...»)
 
(не показаны 4 промежуточные версии этого же участника)
Строка 23: Строка 23:
* [https://www.brightsign.biz/digital-signage-products/series4-overview-video Serial 4]: HD224, HD1024, HS124, HS144, LS424
* [https://www.brightsign.biz/digital-signage-products/series4-overview-video Serial 4]: HD224, HD1024, HS124, HS144, LS424
* Serial 3: HD223, HD1023, LS423, HO523
* Serial 3: HD223, HD1023, LS423, HO523
Все плеера: https://www.brightsign.biz/downloads/overview <br>
All players: https://www.brightsign.biz/downloads/overview <br>
Сравнение всех плееров: https://www.brightsign.biz/digital-signage-products/compare-models <br>
Comparison of all players: https://www.brightsign.biz/digital-signage-products/compare-models <br>
Прошивки: https://brightsign.zendesk.com/hc/en-us/articles/360015198753-Previous-OS-and-Firmware-Releases
Firmware: https://brightsign.zendesk.com/hc/en-us/articles/360015198753-Previous-OS-and-Firmware-Releases


== Начальная настройка ==
== Initial setup ==
=== Подготовка устройства к запуску ===
=== Preparing the device for launch ===
Для настройки параметров сети (Enternet/WiFi/Modem) на устройство необходимо воспользоваться BrightAuthor:connected.
To configure the network parameters (Internet / WiFi / Modem) on the device, you need to use BrightAuthor: connected.
Доступно для загрузки по ссылке https://www.brightsign.biz/digital-signage-products/software/brightauthorconnected.  
Available for download at https://www.brightsign.biz/digital-signage-products/software/brightauthorconnected.
BrightAuthor:connected позволит настроить параметры устройства, в том числе и сетевые параметры.  
BrightAuthor:connected allows you to configure device parameters, including network parameters.
Настройки сетевых параметров зависят от подключаемой сети. Видео инструкции: https://www.brightsign.biz/training-1/tutorial-videos
The network parameter settings depend on the connected network. Video instructions: https://www.brightsign.biz/training-1/tutorial-videos
=== Обновление прошивки ===
=== Firmware update ===
Обновление прошивки до последней версии является хорошей практикой.  
It is good practice to update your firmware to the latest version.
Как узнать и обновить текущую прошивку: https://docs.brightsign.biz/display/DOC/Firmware+Installation+Instructions
How to find out and update your current firmware: https://docs.brightsign.biz/display/DOC/Firmware+Installation+Instructions
=== Подготовка MicroSD карточки ===
=== Preparing MicroSD card ===
'''1.''' Как выбрать MicroSD карточку - https://brightsign.zendesk.com/hc/en-us/articles/218065677-How-to-select-an-SD-card. Рекомендуемые MicroSD карточки - https://www.brightsign.biz/digital-signage-products/accessories/MicroSD-cards <br>
1. How to choose a MicroSD card - https://brightsign.zendesk.com/hc/en-us/articles/218065677-How-to-select-an-SD-card. Recommended MicroSD Cards - https://www.brightsign.biz/digital-signage-products/accessories/MicroSD-cards <br>
'''2.''' Отформатировать в формат exFAT - https://brightsign.zendesk.com/hc/en-us/articles/360041158914-How-do-I-format-or-erase-an-SD-card. Объем памяти MicroSD будет определять объем доступной памяти для приложения SmartPlayer. После форматирования должна быть пустая MicroSD, без сторонних файлов.<br>
2. Format in exFAT format - https://brightsign.zendesk.com/hc/en-us/articles/360041158914-How-do-I-format-or-erase-an-SD-card ... The microSD memory size will determine the amount of available memory for the SmartPlayer app. After formatting, there should be an empty MicroSD, no third-party files. <br>
'''3.''' В корень отформатированной флешке положить клиентское приложение полученное от представителя SmartPlayer. Итоговый состав файлов показан на скриншоте. Никогда не модифицируйте файлы находящиеся в папке '''sp_app''' и '''autorun.brs''', это приведет к некорректной работе приложения (или не запуску приложения системой). Все манипуляции с файлами в папке '''sp_app''' происходят через личный кабинет SmartPlayer. <br>
3. Put the client application received from the SmartPlayer representative into the root of the formatted flash drive. The final composition of the files is shown in the screenshot. Never modify the files located in the folder "sp_app" and "autorun.brs", this will lead to incorrect operation of the application (or not starting the application by the system). All manipulations with files in the '' 'sp_app' '' folder take place through the SmartPlayer personal account. <br>
[[Файл:Brightsigninstallsdcard.jpg|мини|центр]]
[[File: Brightsigninstallsdcard.jpg | mini | center]]
'''4.''' Вставьте MicroSD в разьем на устройстве <br>
4. Insert the MicroSD into the slot on your device <br>
'''5.''' Вытащить питание и вставить его обратно для перезагрузки устройства (кнопка включения питания на корпусе устройства не сработает если вставлена карточка на горячую). Первый запуск от одной до трех минут (зависит от MicroSD). <br>
5. Pull out the power supply and insert it back to reboot the device (the power button on the device case will not work if the card inserted when the device was powered on). The first launch can take up to three minutes (depends on microSD). <br>
'''6.''' Если устройство подключено к сети интернет покажется девятизначный код регистрации.<br>
6. If the device is connected to the Internet, a nine-digit registration code will be displayed. <br>
'''7.''' Далее работаем по инструкции http://wiki.smartplayer.org/index.php/Getting_started<br>
7. Next, follow the instructions http://wiki.smartplayer.org/index.php/Getting_started <br>


== Работа с аудио (громкость) ==
== Working with audio (volume) ==
На BrightSign нет такого понятия, как уровень громкости на устройстве. Уровень громкости устанавливается на определенный контент, который проигрывается. Контент может быть видео (с аудиодоржкой),аудио и т.п. SmartPlayer поддерживает установку громкости на контент при создании трансляции, чем вы можете воспользоваться при необходимости проигрывания контента с определенным уровнем громкости.
On BrightSign, there is no such thing as a volume level on a device. The volume level is set to specific content. Content can be video (with an audio track), audio, etc. SmartPlayer supports setting the volume for content when creating a broadcast, which you can use if you need to play content at a certain volume level.


== Ограничения на текущий момент ==
== Current version limitation (will be added in next version) ==
* нет поддержки статистики proof-of-play (отключена)
* no support for proof-of-play statistics (disabled)
* нет поддержки 4К контета (играть будет но в режиме FullHD)
* no support for 4K content (it will play but in FullHD mode)
* нет поддержки установки даты и времени с личного кабинета SmartPlayer
* no support for setting the date and time from the SmartPlayer personal account
* нет поддержки вертикального режима
* no support for vertical mode


== Обновление приложения вручном режиме ==
== Updating the application manually ==
'''1.''' Отключить питание от устройства и вынуть MicroSD из устройства <br>
1. Disconnect the power from the device and remove the microSD from the device <br>
'''2.''' Переименовать папку на MircoSD sp_app в sp_app_old <br>
2. Rename folder to MircoSD sp_app to sp_app_old <br>
'''3.''' Удалить файл autorun.brs <br>
3. Delete autorun.brs file <br>
'''4.''' Разархивировать архив с новой версией в корень MicroSD (появится папка sp_app и обновленный autorun.brs) <br>
4. Unzip the archive with the new version to the microSD root (the sp_app folder and the updated autorun.brs will appear) <br>
'''5.''' Создать папку cache в sp_app <br>
5. Create cache folder in sp_app <br>
'''6.''' Создать папку CONFIG в sp_app/cache <br>
6. Create CONFIG folder in sp_app / cache <br>
'''7.''' Скопировать файл /sp_app_old/cache/CONFIG/device.txt в папку /sp_app/cache/CONFIG/device.txt <br>
7. Copy file /sp_app_old/cache/CONFIG/device.txt to folder /sp_app/cache/CONFIG/device.txt <br>
'''8.''' Удалить папку sp_app_old <br>
8. Delete sp_app_old folder <br>
'''9.''' Вставить MircoSD в устройство и включить питание <br>
9. Insert MircoSD into device and power on <br>

Текущая версия от 00:17, 12 февраля 2021

Другие языки:

Description

BrightSign are professional network media players supporting HTML5 / JavaScript and other web technologies. BrightSign player can be built into the panel and supplied as a one-piece monoblock.

Supported devices

BrightSign FW version SmartPlayer support
8.x.x Yes
7.x.x Yes
6.x.x No
5.x.x No

All modern players come with firmware 8.x.x and are supported by SmartPlayer. The application can only be launched from a MicroSD card, it will not start from Flash memory. We recommend using MicroSD, since they are protected from external factors (they are closed with a protective piece of iron on the screw) and are more compact, which excludes the possibility of "accidental" falling out of the USB socket.

  • Serial 4: HD224, HD1024, HS124, HS144, LS424
  • Serial 3: HD223, HD1023, LS423, HO523

All players: https://www.brightsign.biz/downloads/overview
Comparison of all players: https://www.brightsign.biz/digital-signage-products/compare-models
Firmware: https://brightsign.zendesk.com/hc/en-us/articles/360015198753-Previous-OS-and-Firmware-Releases

Initial setup

Preparing the device for launch

To configure the network parameters (Internet / WiFi / Modem) on the device, you need to use BrightAuthor: connected. Available for download at https://www.brightsign.biz/digital-signage-products/software/brightauthorconnected. BrightAuthor:connected allows you to configure device parameters, including network parameters. The network parameter settings depend on the connected network. Video instructions: https://www.brightsign.biz/training-1/tutorial-videos

Firmware update

It is good practice to update your firmware to the latest version. How to find out and update your current firmware: https://docs.brightsign.biz/display/DOC/Firmware+Installation+Instructions

Preparing MicroSD card

1. How to choose a MicroSD card - https://brightsign.zendesk.com/hc/en-us/articles/218065677-How-to-select-an-SD-card. Recommended MicroSD Cards - https://www.brightsign.biz/digital-signage-products/accessories/MicroSD-cards
2. Format in exFAT format - https://brightsign.zendesk.com/hc/en-us/articles/360041158914-How-do-I-format-or-erase-an-SD-card ... The microSD memory size will determine the amount of available memory for the SmartPlayer app. After formatting, there should be an empty MicroSD, no third-party files.
3. Put the client application received from the SmartPlayer representative into the root of the formatted flash drive. The final composition of the files is shown in the screenshot. Never modify the files located in the folder "sp_app" and "autorun.brs", this will lead to incorrect operation of the application (or not starting the application by the system). All manipulations with files in the 'sp_app' folder take place through the SmartPlayer personal account.

mini
mini

4. Insert the MicroSD into the slot on your device
5. Pull out the power supply and insert it back to reboot the device (the power button on the device case will not work if the card inserted when the device was powered on). The first launch can take up to three minutes (depends on microSD).
6. If the device is connected to the Internet, a nine-digit registration code will be displayed.
7. Next, follow the instructions http://wiki.smartplayer.org/index.php/Getting_started

Working with audio (volume)

On BrightSign, there is no such thing as a volume level on a device. The volume level is set to specific content. Content can be video (with an audio track), audio, etc. SmartPlayer supports setting the volume for content when creating a broadcast, which you can use if you need to play content at a certain volume level.

Current version limitation (will be added in next version)

  • no support for proof-of-play statistics (disabled)
  • no support for 4K content (it will play but in FullHD mode)
  • no support for setting the date and time from the SmartPlayer personal account
  • no support for vertical mode

Updating the application manually

1. Disconnect the power from the device and remove the microSD from the device
2. Rename folder to MircoSD sp_app to sp_app_old
3. Delete autorun.brs file
4. Unzip the archive with the new version to the microSD root (the sp_app folder and the updated autorun.brs will appear)
5. Create cache folder in sp_app
6. Create CONFIG folder in sp_app / cache
7. Copy file /sp_app_old/cache/CONFIG/device.txt to folder /sp_app/cache/CONFIG/device.txt
8. Delete sp_app_old folder
9. Insert MircoSD into device and power on

Источник — https://wiki.smartplayer.org/index.php?title=BrightSign_OS/en&oldid=1211