Раздел "Стелы АЗС"/en

"Gas Station Stelas" Section

In the SmartPlayer personal account, there is a special section - "Gas Station Stelas".

Overall view of the "Gas Station Stelas" section in the personal account

In this section, you can view available gas station stelas, as well as edit some parameters associated with the stelas.
The list of editable parameters will be described below.

Start Page

The start page of the "Gas Station Stelas" section can be divided into two zones.

Overall view of the start page of the "Gas Station Stela" section

These zones include: "Display Settings" zone "Gas Station Stelas Display" zone Also, on the "start page," you can configure the settings of the gas station stela. To do this, you need to click on the stela itself. After clicking, a sidebar with settings will open.

In this case, to open the settings of the gas station stela, it is necessary to click not on the checkbox/tick in the top right corner of the stela field, but anywhere else in the stela field. Clicking on the checkbox will open other settings in the right sidebar, related to selecting the gas station stela.

"Display Settings" Zone

The "Display Settings" zone consists of parameters that allow changing the display of the device on the start page.

Overall view of the "Display Settings" zone

It includes:

1. Search bar - allows displaying the desired gas station stela by name.
2. Sorting - a list of sorting options for devices located in the personal account.
3. Device selection - functionality that allows to select or deselect all gas station stelas.
4. Device display - allows the user to choose how to display the available devices. The display options include: tile and list.
   

"Device Display" Zone

Example of "tile" display of a gas station stela.

The standard display of devices is in "Tile" format.
When switching to "List" format, the display of gas station stelas also changes. In this display format, parameters describing the gas station stela appear.

Файл:Список плиткой..png

Device display when switching to "List" format view

These parameters include:

• Selection - allows selecting an existing stela using a checkbox/tick.
• Identifier - shows the identifier of the gas station stela.
• Name - displays the name of the gas station stela.
• Status - indicates the status of the gas station stela (ON-line/Off-line).

"Gas Station Stelas Display" Zone

The "Gas Station Stelas Display" zone includes a list of gas station stelas linked to the personal account.

Stelas that are off-line are displayed in gray. Stelas that are on-line are displayed in green.

Overall view of the "Gas Station Stelas Display" zone

When a device is selected using the checkbox/tick at the top right of the device zone, a sidebar with additional settings will open.

Example of a sidebar with settings

The sidebar that appears allows: Removing the selection of a specific device using the "-" icon. Deleting all selected items using the trash can icon. Editing the installed LPG labels. Canceling the selection and thus deselecting all devices.

Device Settings

By clicking on the gas station stela field, you can open the stela's settings.

List of gas station stela settings

The list of gas station stela settings includes:

• Editing stela parameters - allows changing the stela's parameters by clicking on the "Pencil" icon.
• Deleting a stela - allows deleting a gas station stela by clicking on the "Trash Can" icon.
• Network Converter - provides information about the network converter.
• Current data from the controller - transmits current data from the controller.
• Settings - in this section, you can enable or disable the synchronization of displayed information.
• Location - this section provides information about the stela's location.

Network Converter

The user can go to the settings section titled "Network Converter".

Data from the "Network Converter" section.

In this section, they can find data about the network converter:

1. Information can be obtained about: the status of the network converter, its MAC address, firmware version, and model.
2. The ability to set a password for the TCP server and a password for managing the network converter. It's important to consider case sensitivity when entering.

It's advisable to record and save the entered passwords separately. If the user loses them, they will face difficulties in regaining access to the stela. In the event of losing access, the user will have to pay an additional fee and wait for access restoration.

Also, in the "Network Converter" section, an online reboot of the stela can be performed. There is a special button for this.

The "Reboot" button

Current Data from the Controller

After accessing the "Current Data from the Controller" settings, the user can view the current information about the gas station stela.

Example of parameters displayed in the "Current Data from the Controller" section.

The list of provided information includes:

1. Information with a description of the fuel displayed on the board, including: the serial number, fuel cost value, a label about the type of fuel, and the presence of a "snowflake" on the fuel.
2. The brightness level at which the gas station stela operates.
3. The type of controller used in the gas station stela, with additional description.
4. IP address of the gas station stela.
5. The port number through which the gas station stela is connected.
6. "Refresh" button - updates the information about the gas station stela and "Close" button - takes the user back one step.

"Snowflake" is an element displayed on the stela, indicating frost-resistant fuel at the gas station.

Examples of enabled and disabled snowflakes.

Additional Functionality

In the left sidebar, additional actions with the stelas can be implemented. Below is a list of possibilities for working with stelas:

1. Add - allows describing and adding a stela to the personal account.
2. Add Gas Station - allows adding a gas station and its data.

"Add" Functionality

When adding a gas station stela, it is necessary to fill in the parameters that will be added to the personal account.

"Add" functionality divided into zones

All the parameters needed for completion can be conditionally divided into two zones:

1. Settings zone
2. Device zone

After filling in all the fields, you need to click the "Save" button at the top. If the user needs to go back one step, they should click the "Cancel" button.

"Settings" Zone

The "Settings" zone includes a list of necessary parameters to be filled in.

Example of the "Settings" zone

This list includes:

1. IP address - it's necessary to specify the IP address.
2. Port - the user needs to specify the port.
3. TCP server password - the user needs to set a password for the server.
4. Password for managing the network converter - the user needs to set a password for the network converter.
5. Name - it's necessary to specify the name of the stela.
6. Address - indicate the actual location of the stela.
7. Folder - the repository where information about the stela will be stored.
8. Additional description - the possibility to manually add additional information about the gas station stela.
9. Brightness - the ability to remotely set the brightness of the stela using a slider.

"Device" Zone

The "Device" zone also includes parameters to be filled in.

Example of parameters in the "Device" zone

These parameters include:

1. Add new - allows adding a new line with stela parameters.
2. Order - the serial number of the stela is entered.
3. Value - the user needs to enter a value for the gas station stela.
4. Label - allows the user to choose the type of fuel from a dropdown list.
5. Snowflake - the option to enable a toggle/slider for marking winter fuel.
6. Delete - removes the current line with stela parameters.
7. Get current data - receive data from the connected gas station stela.

"Add Gas Station" Functionality

The "Add Gas Station" functionality allows the user to add a gas station to their personal account.

Overall view of the "Add Gas Station" functionality page

When adding a gas station, the user must fill in the following parameters:

1. Name - the name of the gas station is specified.
2. Identifier - the identifier of the gas station is entered.
3. Folder - select the "folder" in which the gas station and its information will be stored.
4. Additional description - the ability to create an additional description with details about the gas station.
5. "Save" button - a button that allows saving added data and incorporating it into the personal account.
6. "Cancel" button - allows cancelling all entered changes and returning to the previous step.

Final Result

Users understand how the "Gas Station Stelas" section works and know how to use this functionality to solve their tasks.