Philips/en

Description

Professional panels Philips and commercial TVs with built-in player based on Android OS.

Supported devices

Devices with OS Android 5+

For clarification on specific models, send a request to tech@smartplayer.org

Initial setup

For commercial screens model 43HFL5011T / 12

1. If necessary, initially set up the TV (choice of language, region, etc.). It is not mandatory, but the menu shall be at least in English.
2. After starting the TV, enter the combination 319753 mute from the remote control. The service menu will open.
3. In the service menu, you need to configure the Internet.
4. In case of Ethernet, RJ-45 input
5. When connecting via Wi-Fi in the service menu, go to the item Wireless and Networks - Connect to Network - wireless and connect to an available network.
6. Download the archive using this link and unpack it to the root of the usb flash drive.
7. Insert the USB drive into the usb port at the back of the panel.
8. In the service menu, go to Upgade and Clone - Clone USB to TV, the installation of the application from the flash drive will start, when finished, click Close
9. Setting the application autostart: Switch On settings - Feature Settings - App - Smart Player, you need to confirm the Smart Player selection
10. After rebooting the screen, the application will automatically start

For professional screens model 42BDL5055P

1. Download the SmartPlayer application and save it to a USB flash drive
2. Insert USB drive into the panel port
3. At the initial start of the screen, you need to configure the Internet Connection and time
4. Dial the combination on the remote HOME + 1888, the screen will go to the engineering menu
5. Go to Apps

1. Then to File Manager

1. Find mnt folder

1. Then usb_storage

1. Go to the pen drive and find the SmartPlayer app

1. Install the SmartPlayer application. After the installation, the application will start automatically