Removing milliseconds from content
Situation Description
A user may have video content in a broadcast that is not rounded to an even duration. For example, it could be a clip that plays for a duration of 15.4 seconds.
During the playback of such content with a fractional duration, the device may experience delays when transitioning to the next content, or the duration value itself may draw unnecessary attention from the user. To fix this issue, a feature has been added to the video editor that allows trimming the content to a whole number.
Action Algorithm
The user can trim the video to a whole number in the SmartPlayer account in two ways. Both methods are described in the article below. But before this, the user must activate certain settings in their account.
To activate the necessary settings, the user must go to the "Settings" section of the account and scroll through the list to select the "Upload video parameters" category.
In the list of these settings, the user needs to set one of the available values (recommended "30" or "60") in the "Frame rate" parameter, and also activate the "Trim video duration to whole numbers" toggle switch.
After setting these parameters, the user can proceed to process the necessary video content.
Main Solution
To use this feature, the user must first log into the SmartPlayer account. The next step is for the user to go to the "Content" section of the account and select the "Upload" category.
In the upload window that appears, the user must select the option "Upload video with mp4 conversion."
After the upload, the video content will appear in the list of available contents for insertion into a broadcast in the "Content" section.
To check the change in video content duration and the rounding of the video duration to a whole number, the user needs to create a broadcast with a content zone and insert the uploaded content into it. At the bottom of the screen, the user should see that the video content duration now has a whole number value.
Alternative Option
In the alternative implementation, the user must also be logged into the SmartPlayer account. The next step is for the user to go to the "Content" section of the account and select the "Video Editor" category.
After selecting the video content that needs trimming and moving it into the video editor zone, the user needs to click anywhere within the area where the video is located. This action is necessary to open the video editor settings.
Once the video editor settings are open, the user should shift their focus to the right toolbar and find the "End Time" parameter. Using this parameter, the user can set the desired duration in seconds for the video content. Additionally, the user must activate the toggle in the "Trim video duration to whole numbers" line.
After configuring the "End Time" parameter, the user should scroll down to the bottom of the toolbar and click the "Process" button.
Once the processing starts, the video will be converted according to the user’s desired parameters. At this point, a processing progress bar will be shown on the screen.
After finishing the video content processing, the user will need to click the "Save" icon in the upper right corner and select a name and folder for saving the processed video content.
Video Instruction
Removing milliseconds in content
Дополнительная информация
Если данная статья не помогает использовать функционал по назначению или после ее прочтения остаются вопросы можно озвучить данные вопросы в разделе "Обсуждения" вверху страницы.
Также дополнительную информацию можно узнать на странице Как взаимодействовать пользователю с разделом "Обсуждения"
