Translations:Интеграция SmartPlayer с ivideon/4/en

Материал из SmartPlayer
Версия от 15:20, 23 октября 2024; N.Bloshkin (обсуждение | вклад) (Новая страница: «== '''Adding a Camera to the Device Used in a SmartPlayer Broadcast''' == To receive information about changes in the camera's status, the user needs to connect it to the device that will be used in the broadcast. This can be done in the SmartPlayer personal account. {{Note|The device to which the camera will be connected must first be added to the personal account. It will be displayed in the "Devices" section. |warn}} Initially, the user needs to navigate...»)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)

Adding a Camera to the Device Used in a SmartPlayer Broadcast

To receive information about changes in the camera's status, the user needs to connect it to the device that will be used in the broadcast. This can be done in the SmartPlayer personal account.

The device to which the camera will be connected must first be added to the personal account. It will be displayed in the "Devices" section.

Initially, the user needs to navigate to the "Devices" section in the personal account.

Example of the "Devices" section in the SmartPlayer personal account

Next, the user needs to find the required device, click on it, and go to the "Settings" section in the right-hand toolbar.

Example of the "Settings" section in the device settings list

In the settings section, they need to find the "Camera" category and open it.

Example of the "Camera" category in the device settings

Once the "Camera" category is opened, the user must click the "Add Camera" button and fill in the following fields:

  • Camera Name - enter the camera's name
  • Camera Identifier - this can be obtained from the ivideon personal account, in the "Camera Information" section (Camera ID)
Using the "Add Camera" button, the user can add multiple cameras to one device.
Example of the Camera ID in the ivideon personal account

Receiving Data in SmartPlayer via the ivideon API Key

To connect to SmartPlayer and receive events from ivideon, the user needs to obtain an API key from the ivideon personal account. After obtaining the API key, it must be added to the settings in the SmartPlayer personal account.

Creating an API Key in the ivideon Personal Account

To obtain an API key, the ivideon user must have a special subscription plan.

To obtain the API key, the user needs to navigate to the "Settings" section in the ivideon personal account and go to the "Access and Security" category.

Example of the "Settings" section and "Access and Security" category in the ivideon personal account

On the opened page, the user needs to find the "For Developers" block and click the "Open" button next to the "API Access Keys" line.

Example of the functionality for creating an API key in the ivideon personal account

On the new page, the user must create a new API key. To do this, they need to click the "Create Key" button in the upper right corner. It is also possible to delete all keys on this page by clicking the "Delete All Keys" button.

Example of the "Create Key" button

In the opened window, the user must enter a name for the key and click the "Continue" button. The "Continue" button will be inactive until the user enters the key name.

Example of the "Continue" button and the field for entering the key name

The next window will display the new key, which the user must copy by clicking the special icon next to the line where the key is shown. The user must also check the checkbox "I have copied the key." Otherwise, the user will not be able to complete the creation of the API key, as the "Done" button will remain inactive.

Example of the window with the created API key

Clicking the "Done" button will return the user to the page with the list of keys, where the new key will be displayed for use in connecting to SmartPlayer.

Example of the created API key