Broken/SSSP/13/en

Материал из SmartPlayer

Configuring Autostart

!! Applicable only for Tizen 2.3 (2.4) SSSP4 devices !!

  1. Press [Menu] on the remote control.
  2. In the menu, select [System]
  3. Find [Auto source] item and set the following parameters:
  4. * Auto Source: ON
  5. * Restore main Source: OFF
  6. * Main source: Display Port (source must not be connected to the device). The system does not find the main source, it will start additional. source.
  7. * Add. source: MagicInfo S / Run URL Addresses