Broken/WebOS Signage/10/en
Материал из SmartPlayer
3. USB installation of the application using a USB stick and scap_installation.json file
3.1 Preparing flash storage (USB flash drive)
- Format the flash drive to NTFS format
- Put the file scap_installation.json in the root of the flash drive
3.2 Preparing the device
- If the device has been used before, make it a factory reset. If the device has not been used before, skip this step.
- Connect the device to the network via RJ45 with Internet access, in other words, insert the Internet cable into the device connector.
- Insert the USB flash drive into the USB connector of the device, prepared in paragraph 3.1
- Turn on the device from the control panel by pressing the tap button or on in the monitor section
3.3 Installing the application
- Do nothing, the device will reboot once and show the registration code in the SmartPlayer platform. Submit to https://cms.smartplayer.org/ and register your device for further work.
- Remove the USB flash drive from the device's USB connector