Translations:Инструкция по установке образа ОС Raspbian на SD Card/2/en
Example based on Windows
All the versions listed above have the same interface, so one version (Windows) will be covered:
![](/images/f/f7/1_%D1%8D%D1%82%D0%B0%D0%BF.png)
Click on "CHOSE OS" and select "Use custom":
![](/images/5/58/2_%D1%8D%D1%82%D0%B0%D0%BF.png)
Choose your system image. It's worth noting that you don't necessarily have to unzip the downloaded OS archive (as in this case)
![](/images/b/bb/3_%D1%8D%D1%82%D0%B0%D0%BF.png)
After selecting the image, click on "CHOOSE_STORAGE" and choose the device where the image will be written.
![](/images/4/4c/4_%D1%8D%D1%82%D0%B0%D0%BF.png)
Click on "WRITE". After clicking, the system will warn that the selected device will be formatted, click on "YES":
![](/images/2/22/5_%D1%8D%D1%82%D0%B0%D0%BF.png)
The writing of the image to the SD card will begin:
![](/images/6/60/6_%D1%8D%D1%82%D0%B0%D0%BF.png)
After writing, an automatic check of the written image for integrity will start:
![](/images/5/57/7_%D1%8D%D1%82%D0%B0%D0%BF.png)
It's recommended not to skip this step. Afterwards, a window will appear indicating successful writing and verification. After that, the SD card can be removed:
![](/images/9/9e/8_%D1%8D%D1%82%D0%B0%D0%BF.png)