Translations:BrightSign OS/29/en

Manual Application Update

Starting from version v1.3.0 and higher, the client application is updated via the SmartPlayer server. This instruction is relevant only if you need to update from a version earlier than v1.3.0. For example, updating from v1.0.0 to v1.3.0. After v1.3.0, updates can be done remotely through the SmartPlayer server. 1. Disconnect power from the device and remove the MicroSD card
2. Rename the folder on the MicroSD from sp_app to sp_app_old
3. Delete the file autorun.brs
4. Extract the new version archive to the root of the MicroSD (you will see a new sp_app folder and updated autorun.brs)
5. Create a folder named cache inside sp_app
6. Create a folder named CONFIG inside sp_app/cache
7. Copy the file /sp_app_old/cache/CONFIG/device.txt to /sp_app/cache/CONFIG/device.txt
8. Delete the folder sp_app_old
9. Insert the MicroSD back into the device and power it on

Incorrect Resolution on Device Startup

If, when installing and starting the application, the image does not fill the screen or appears cropped, check the resolution settings in your device configuration. To do this, enable the Diagnostic Web Server in the device settings and verify or adjust the resolution as needed: Diagnostic Web Server Configuration