Translations:Novastar TB 1-4G Инструкция по установке/4/en

Step 4: Enabling Debug Mode and Connecting via ADB

It is mandatory to set "Novalauncher" as the default application, otherwise Viplex will not function.

In the opened Viplex application, type "Novasoft" and "Selftest" (The sections "User Software" and "Debug mode" will appear).

Example of the new sections appearing upon successful action

In the application, the user needs to select the "User Software" section and connect to the required device. The next step is to enable the "ADB" setting. This action is performed using the toggle switch. If the "ADB" setting slider is green, it means it is active.

Example of activating the "ADB" setting in the application

Next, the user must go to the "Terminals" section and right-click on the desired device. In the menu that appears, select the "debug tool" option.

Example of the "debug tool" option in the "Terminals" section

Content Restrictions on Novastar TB 1-4G

The content restrictions for Novastar TB 1-4G devices include:

1. Maximum video resolution in pixels: 960 x 750, resulting in an area of approximately 650,000 pixels. This is the device's limit, and at this level, the device may lag due to other processes consuming system resources.
2. Maximum internal storage for content: 4 GB, with the rest occupied by the Android OS.
3. Video parameters:

• Maximum resolution: 960x750, which totals an area of approximately 650,000 pixels. It is recommended to use lower resolutions to leave resources for the Android OS.
• Recommended resolution: 208 (width) x 312 (height). These resolution parameters were used during testing.

Product Information

Product information for Novostar is available at this link.

Additional Information

If this article does not help you use the functionality as intended or if you have questions after reading it, you can raise these questions in the "Discussions" section at the top of the page.

Example of the "Discussions" tab on the wiki page