Просмотр кода страницы Включение и выключение дисплея через личный кабинет/en

== '''Situation Description''' ==
Inside the SmartPlayer platform, users have the ability to turn the device's display on and off through their personal account. This allows users to control device displays in online mode.
{{Note|Currently, this is only applicable for Linux. |warn}}
== '''Operational Logic''' ==
Users can turn the device's display on and off at any time through the SmartPlayer platform via their personal account.<br>
To do this, one needs to go to the "Devices" section and find the required online device.
[[File:Путь_до_онлайн_устройства.png|thumb|center| Path to the "Devices" section and selecting a device with online status. |800px]]
{{Note|A device displayed as online has a green frame. An offline device has a gray frame|warn}}
[[File:Примеры_устройств_с_разными_статусами.png|thumb|center| Differences between online and offline devices.|800px]]
Next, the user needs to click on the online device to see the sidebar with settings.
[[File:Настройки включения.png|thumb|center| Example of a sidebar with settings.|800px]]
After the sidebar with settings appears, the user needs to select the "Settings" section and click on it.
[[File:Раздел_настройки.png|thumb|center| The designated "Settings" section|800px]]
By clicking on the "Settings" section, a comprehensive menu with settings will open for the user. From the list of settings that appear, the user needs to open the "Technical Parameters of COM Ports" block.
[[File:Настройка_ком_портов.png|thumb|center| Adding COM ports|800px]]
=== '''COM Port Configuration''' ===
When adding a COM port, the user needs to fill in all the fields in this block.
{{Note|A system administrator on the user's side should assist with filling in the fields in the "Technical Parameters of COM Ports" block.|warn}}
This block consists of the following parameters:
* Port Name - the only parameter to be entered manually by the user.<br>
The other parameters are drop-down menus with a list of specified values and descriptions of these values.
* Data Transfer Rate
[[File:Скорость_передачи_данных.png|thumb|center| Description of the "Data Transfer Rate" parameter|400px]]
* Parity
[[File:Параметр_четность.png|thumb|center| Description of the "Parity" parameter|400px]]
* Data Bits
[[File:Параметр_биты_данных.png|thumb|center| Description of the "Data Bits" parameter |400px]]
* Stop Bits
[[File:Параметр_стоп_биты.png|thumb|center| Description of the "Stop Bits" parameter|400px]]
* Flow Control
[[File:Параметр_управления_потоком.png|thumb|center| Description of the "Flow Control" parameter|400px]]
* Action Selection
[[File:Параметр_выбор_действия.png|thumb|center| Adding description of the "Action Selection" parameter|400px]]
After setting all the parameters, it is necessary to click the "Save Changes" button at the bottom.
{{Note|To delete the current COM port settings, use the trash can icon.
[[File:Выделенная иконка.png|thumb|center| The "Delete" icon.|800px]]|warn}}
=== '''Appearance of New Setting''' ===
After saving all the settings related to the COM port, the user needs to return to the device sidebar. A new icon "Turn off/on display" will appear there.
[[File:Выключить_дисплей.png|thumb|center| The new icon "Turn off/on display"|800px]]
Depending on the current state of the device, the color of its frame changes. <br>
For example: while the device is on, the frame color is bright green. As soon as the device is turned off, the color of the frame changes to dark green.
[[File:Изменения_рамок.png|thumb|center| Frame changes depending on the device status.|800px]]
All available device statuses can be viewed by hovering over the "Device Statuses" line.
[[File:Поиск_статуса_устройств.png|thumb|center| List of all device statuses|800px]]
== '''Subtleties and Nuances''' ==
If the applied COM port settings are deleted using the button, then even with the display turned off, the device will be shown as online (having a green frame at the bottom). This is because, in the absence of COM port settings, there is no display monitoring on the device, and therefore it is shown as an online device.
== '''Final Result''' ==
The user can turn the device display on and off in the personal account on Linux.