Раздел "Стелы АЗС"/en: различия между версиями

Материал из SmartPlayer
Нет описания правки
(Новая страница: «==== '''"Device" Zone''' ==== The "Device" zone also includes parameters to be filled in. center|thumb|Example of parameters in the "Device" zone|800px These parameters include: # Add new - allows adding a new line with stela parameters. # Order - the serial number of the stela is entered. # Value - the user needs to enter a value for the gas station stela. # Label - allows the user to choose the ty...»)
 
(не показано 9 промежуточных версий 2 участников)
Строка 1: Строка 1:
== '''Gas Station Pylons Section''' ==
== '''"Gas Station Stelas" Section''' ==
The SmartPlayer personal account has a special section "Gas Station Pylons".
In the SmartPlayer personal account, there is a special section - "Gas Station Stelas".
[[File:Стелы_АЗС_общий_вид.png|center|thumb|General view of the "Gas Station Pylons" section in the personal account|800px]]
[[File:Стелы_АЗС_общий_вид.png|center|thumb|Overall view of the "Gas Station Stelas" section in the personal account|800px]]
In this section, you can view the available gas station pylons, as well as edit certain parameters related to the pylons.<br>
In this section, you can view available gas station stelas, as well as edit some parameters associated with the stelas.<br>
The list of editable parameters will be described below.
The list of editable parameters will be described below.
=== '''Home Page''' ===
=== '''Start Page''' ===
The home page of the "Gas Station Pylons" section can be divided into two areas.
The start page of the "Gas Station Stelas" section can be divided into two zones.
[[File:Стартовая_страница_стелы_азс.png|center|thumb|General view of the home page of the "Gas Station Pylon" section|800px]]
[[File:Стартовая_страница_стелы_азс.png|center|thumb|Overall view of the start page of the "Gas Station Stela" section|800px]]
These areas include:
These zones include:
Area "Display Settings"
"Display Settings" zone
Area "Display of Gas Station Pylons"
"Gas Station Stelas Display" zone
Also, on the "home page", you can adjust the settings of the gas station pylon. To do this, you need to click on the pylon itself. After clicking, a sidebar with settings will open.
Also, on the "start page," you can configure the settings of the gas station stela. To do this, you need to click on the stela itself. After clicking, a sidebar with settings will open.
{{Note|In this case, to open the settings of the gas station pylon, it is necessary to click not on the checkbox/tick in the upper right corner of the pylon field but on any other place in the pylon field. If you click on the checkbox, other settings related to the selection of the gas station pylon will open in the right sidebar.|warn}}
{{Note|In this case, to open the settings of the gas station stela, it is necessary to click not on the checkbox/tick in the top right corner of the stela field, but anywhere else in the stela field. Clicking on the checkbox will open other settings in the right sidebar, related to selecting the gas station stela.|warn}}
==== '''Area "Display Settings"''' ====
==== '''"Display Settings" Zone''' ====
The "Settings" area consists of parameters that allow changing the display of the device on the home page.
The "Display Settings" zone consists of parameters that allow changing the display of the device on the start page.
[[File:Зона_отображения.png|center|thumb|General view of the "Display Settings" area|800px]]
[[File:Зона_отображения.png|center|thumb|Overall view of the "Display Settings" zone|800px]]
It consists of:
It includes:
# Search Bar - allows displaying the required gas station pylon by name.
# Search bar - allows displaying the desired gas station stela by name.
# Sorting - a list of sorting options for devices located in the personal account.
# Sorting - a list of sorting options for devices located in the personal account.
# Device Selection - functionality that allows selecting or deselecting all gas station pylons.
# Device selection - functionality that allows to select or deselect all gas station stelas.
# Device Display - allows the user to choose in what format to display the available devices. Display options available are: tile and list..<br>
# Device display - allows the user to choose how to display the available devices. The display options include: tile and list.<br>
When displaying devices in the "list" format, additional information about the device can be obtained.
==== '''"Device Display" Zone''' ====
[[File:Отображение_плиткой.png|center|thumb|General view of the "Display Settings" area|800px]]
[[File:Пример_отоюражения_плиткой.png|right|thumb|Example of "tile" display of a gas station stela.|150px]]
This information includes:
The standard display of devices is in "Tile" format.<br>
# Selection - the ability to select the gas station pylon.
When switching to "List" format, the display of gas station stelas also changes. In this display format, parameters describing the gas station stela appear.
# Identifier - indicates the identifier of the gas station pylon.
[[File:Список_плиткой..png|center|thumb|Device display when switching to "List" format view|800px]]
# Name - displays the name of the gas station pylon.
# Status - indicates the status of the gas station pylon (on-line/off-line).
==== '''Device Display Area''' ====
[[File:Пример_отоюражения_плиткой.png|right|thumb|Example of "tile" display of a gas station pylon.|150px]]
The standard display of devices is in the "Tile" format.<br>
When switching to the "List" format, the display of gas station pylons also changes. In this display format, parameters that describe the gas station pylon appear.
[[File:Список_плиткой.png|center|thumb|Device display when switching view in "List" format|800px]]
These parameters include:
These parameters include:
Selection - allows selecting an existing pylon using a checkbox/tick.
* Selection - allows selecting an existing stela using a checkbox/tick.
This checkbox, once checked, opens additional settings in the right sidebar. They allow: removing the device from the list of selected ones, editing LPG parameters, deselecting the device. The same principle of action with the checkbox applies when displayed as "tiles".
* Identifier - shows the identifier of the gas station stela.
Identifier - shows the identifier of the gas station pylon.
* Name - displays the name of the gas station stela.
Name - displays the name of the gas station pylon.
* Status - indicates the status of the gas station stela (ON-line/Off-line).
Status - shows the status of the gas station pylon (ON-line/Off-line).
==== '''"Gas Station Stelas Display" Zone''' ====
==== '''Gas Station Pylons Display Area''' ====
The "Gas Station Stelas Display" zone includes a list of gas station stelas linked to the personal account.
The "Gas Station Pylons Display" area includes a list of gas station pylons linked to the personal account.
{{Note|Stelas that are off-line are displayed in gray. Stelas that are on-line are displayed in green.|warn}}
[[File:Строка_устройств.png|center|thumb|General view of the "Gas Station Pylons Display" area|800px]]
[[File:пример Стела_онлайн.png|center|thumb|Overall view of the "Gas Station Stelas Display" zone|800px]]
When a device is selected using the checkbox/tick at the top right of the device area, a sidebar with additional settings opens.
When a device is selected using the checkbox/tick at the top right of the device zone, a sidebar with additional settings will open.
[[File:Пример_сайдюара_с_настройками.png|center|thumb|Example of a sidebar with settings|800px]]
[[File:Пример_сайдюара_с_настройками.png|center|thumb|Example of a sidebar with settings|800px]]
The appearing sidebar allows:
The sidebar that appears allows:
Removing the selection of a specific device using the "-" icon.
Removing the selection of a specific device using the "-" icon.
Deleting all selected items using the trash bin icon.
Deleting all selected items using the trash can icon.
Editing the set LPG labels.
Editing the installed LPG labels.
Canceling the selection, thereby deselecting all devices.
Canceling the selection and thus deselecting all devices.
==== '''Device Settings''' ====
==== '''Device Settings''' ====
By clicking on the gas station pylon field, a list of its settings can be opened.
By clicking on the gas station stela field, you can open the stela's settings.
[[File:Настройки_устройства_в_стеллах_АЗС.png|center|thumb|List of gas station pylon settings|800px]]
[[File:Настройки_на_стеле.png|center|thumb|List of gas station stela settings|800px]]
The list of settings for gas station pylons includes:
The list of gas station stela settings includes:
Editing pylon parameters - allows changing the parameters of the pylon by clicking on the "Pencil" icon.
* Editing stela parameters - allows changing the stela's parameters by clicking on the "Pencil" icon.
Deleting the pylon - allows removing the gas station pylon by clicking on the "Trash Bin" icon.
* Deleting a stela - allows deleting a gas station stela by clicking on the "Trash Can" icon.
Network Converter - provides information about the network converter.
* Network Converter - provides information about the network converter.
Current data from the controller - transmits current data from the controller.
* Current data from the controller - transmits current data from the controller.
Settings - in this section, synchronization can be turned on or off.
* Settings - in this section, you can enable or disable the synchronization of displayed information.
Location - this section gives information about the location of the pylon.
* Location - this section provides information about the stela's location.
===== '''Network Converter''' =====
The user can go to the settings section titled "Network Converter".
[[File:Сетевой_преобразователь.png|center|thumb|Data from the "Network Converter" section.|800px]]
In this section, they can find data about the network converter:
# Information can be obtained about: the status of the network converter, its MAC address, firmware version, and model.
# The ability to set a password for the TCP server and a password for managing the network converter. It's important to consider case sensitivity when entering.
{{Note|It's advisable to record and save the entered passwords separately. If the user loses them, they will face difficulties in regaining access to the stela. In the event of losing access, the user will have to pay an additional fee and wait for access restoration.|warn}}
Also, in the "Network Converter" section, an online reboot of the stela can be performed. There is a special button for this.
[[File:Перезагрузка_стелы.png|center|thumb|The "Reboot" button|800px]]
===== '''Current Data from the Controller''' =====
After accessing the "Current Data from the Controller" settings, the user can view the current information about the gas station stela.
[[File:Текущие_данные.png|center|thumb|Example of parameters displayed in the "Current Data from the Controller" section.|800px]]
The list of provided information includes:
# Information with a description of the fuel displayed on the board, including: the serial number, fuel cost value, a label about the type of fuel, and the presence of a "snowflake" on the fuel.
# The brightness level at which the gas station stela operates.
# The type of controller used in the gas station stela, with additional description.
# IP address of the gas station stela.
# The port number through which the gas station stela is connected.
# "Refresh" button - updates the information about the gas station stela and "Close" button - takes the user back one step.
{{Note|"Snowflake" is an element displayed on the stela, indicating frost-resistant fuel at the gas station.
[[File:Снежинки.png|center|thumb|Examples of enabled and disabled snowflakes.|800px]]|warn}}
== '''Additional Functionality''' ==
== '''Additional Functionality''' ==
In the left sidebar, additional actions with pylons can be implemented.
In the left sidebar, additional actions with the stelas can be implemented.
Below is a list of possibilities for working with pylons:
Below is a list of possibilities for working with stelas:
Add - allows describing and adding a pylon to the personal account.
# Add - allows describing and adding a stela to the personal account.
Add Gas Station - allows adding a gas station and its data.
# Add Gas Station - allows adding a gas station and its data.
=== '''"Add" Functionality''' ===
=== '''"Add" Functionality''' ===
When adding a gas station pylon, it is necessary to fill in parameters that will be added to the personal account.<br>
When adding a gas station stela, it is necessary to fill in the parameters that will be added to the personal account.<br>
[[File:Добавить_стелу_АЗС.png|center|thumb|"Add" functionality divided into zones|800px]]
[[File:Добавить_стелу_АЗС.png|center|thumb|"Add" functionality divided into zones|800px]]
All the necessary parameters for filling can be conventionally divided into two zones:
All the parameters needed for completion can be conditionally divided into two zones:
Setting Zone
# Settings zone
Device Zone
# Device zone
After filling in all the fields, you need to click the "Save" button at the top. If the user needs to go back a step, they should click the "Cancel" button.
After filling in all the fields, you need to click the "Save" button at the top. If the user needs to go back one step, they should click the "Cancel" button.
==== '''Setting Zone''' ====
==== '''"Settings" Zone''' ====
The "Setting" zone includes a list of necessary parameters to fill out.
The "Settings" zone includes a list of necessary parameters to be filled in.
[[File:Настройка_параметров_АЗС_.png|center|thumb|Example of the "Setting" zone|800px]]
[[File:Настройки_настройки.png|center|thumb|Example of the "Settings" zone|800px]]
This list includes:
This list includes:
IP Address - it is necessary to enter the IP address.
# IP address - it's necessary to specify the IP address.
Port - the user needs to specify the port.
# Port - the user needs to specify the port.
Password for TCP server - the user needs to enter the password for the server.
# TCP server password - the user needs to set a password for the server.
Password for network converter management - the user needs to enter the password for the network converter.
# Password for managing the network converter - the user needs to set a password for the network converter.
Name - it is necessary to enter the name of the pylon.
# Name - it's necessary to specify the name of the stela.
Address - indicate the actual location of the pylon.
# Address - indicate the actual location of the stela.
Folder - the repository where information about the pylon will be stored.
# Folder - the repository where information about the stela will be stored.
Additional Description - the ability to manually add additional information about the gas station pylon.
# Additional description - the possibility to manually add additional information about the gas station stela.
Brightness - the ability to remotely set the brightness of the pylon using a slider.
# Brightness - the ability to remotely set the brightness of the stela using a slider.
==== '''Device Zone''' ====
==== '''"Device" Zone''' ====
The "Device" zone also includes parameters to fill out.
The "Device" zone also includes parameters to be filled in.
[[File:Параметры_для_зоны_настройки.png|center|thumb|General view of the "Add gas station" functionality page|800px]]
[[File:Параметры_зоны_устройств.png|center|thumb|Example of parameters in the "Device" zone|800px]]
These parameters include:
These parameters include:
# Add New - allows adding a new line with pylon parameters.
# Add new - allows adding a new line with stela parameters.
# Order - the sequential number of the pylon is entered.
# Order - the serial number of the stela is entered.
# Value - the user needs to enter a value for the gas station pylon..
# Value - the user needs to enter a value for the gas station stela.
# Label - allows the user to choose the required type of fuel from a drop-down list.
# Label - allows the user to choose the type of fuel from a dropdown list.
# Snowflake - the possibility to turn on a switch/slider for indicating winter fuel.
# Snowflake - the option to enable a toggle/slider for marking winter fuel.
# Delete - delete the current line with pylon parameters.
# Delete - removes the current line with stela parameters.
# Get Current Data - receive data from the connected gas station pylon.
# Get current data - receive data from the connected gas station stela.
=== '''Functionality "Add Gas Station"''' ===
=== '''"Add Gas Station" Functionality''' ===
The "Add Gas Station" functionality allows the user to add a gas station to their personal account.  
The "Add Gas Station" functionality allows the user to add a gas station to their personal account.
[[File:Добавить_АЗС.png|center|thumb|General view of the "Add gas station" functionality page|800px]]
[[File:Добавить_АЗС.png|center|thumb|Overall view of the "Add Gas Station" functionality page|800px]]
When adding a gas station, the user must fill in the following parameters:  
When adding a gas station, the user must fill in the following parameters:
# Name - the name of the gas station is entered.
# Name - the name of the gas station is specified.
# Identifier - the identifier of the gas station is entered.
# Identifier - the identifier of the gas station is entered.
# Folder - select the "folder" in which the gas station and information about it will be stored.
# Folder - select the "folder" in which the gas station and its information will be stored.
# Additional Description - the possibility to create an additional description with details about the gas station.
# Additional description - the ability to create an additional description with details about the gas station.
# Save Button - a button that allows saving added data and entering it into the personal account.
# "Save" button - a button that allows saving added data and incorporating it into the personal account.
# Cancel Button - allows canceling all entered changes and returning to the previous step.
# "Cancel" button - allows cancelling all entered changes and returning to the previous step.
== '''Final Result''' ==
== '''Final Result''' ==
Users understand how the "Gas Station Pylons" section works and know how to use this functionality to solve their tasks.
Users understand how the "Gas Station Stelas" section works and know how to use this functionality to solve their tasks.

Текущая версия от 16:09, 7 декабря 2023

"Gas Station Stelas" Section

In the SmartPlayer personal account, there is a special section - "Gas Station Stelas".

Overall view of the "Gas Station Stelas" section in the personal account

In this section, you can view available gas station stelas, as well as edit some parameters associated with the stelas.
The list of editable parameters will be described below.

Start Page

The start page of the "Gas Station Stelas" section can be divided into two zones.

Overall view of the start page of the "Gas Station Stela" section

These zones include: "Display Settings" zone "Gas Station Stelas Display" zone Also, on the "start page," you can configure the settings of the gas station stela. To do this, you need to click on the stela itself. After clicking, a sidebar with settings will open.

In this case, to open the settings of the gas station stela, it is necessary to click not on the checkbox/tick in the top right corner of the stela field, but anywhere else in the stela field. Clicking on the checkbox will open other settings in the right sidebar, related to selecting the gas station stela.

"Display Settings" Zone

The "Display Settings" zone consists of parameters that allow changing the display of the device on the start page.

Overall view of the "Display Settings" zone

It includes:

  1. Search bar - allows displaying the desired gas station stela by name.
  2. Sorting - a list of sorting options for devices located in the personal account.
  3. Device selection - functionality that allows to select or deselect all gas station stelas.
  4. Device display - allows the user to choose how to display the available devices. The display options include: tile and list.

"Device Display" Zone

Example of "tile" display of a gas station stela.

The standard display of devices is in "Tile" format.
When switching to "List" format, the display of gas station stelas also changes. In this display format, parameters describing the gas station stela appear.

Файл:Список плиткой..png
Device display when switching to "List" format view

These parameters include:

  • Selection - allows selecting an existing stela using a checkbox/tick.
  • Identifier - shows the identifier of the gas station stela.
  • Name - displays the name of the gas station stela.
  • Status - indicates the status of the gas station stela (ON-line/Off-line).

"Gas Station Stelas Display" Zone

The "Gas Station Stelas Display" zone includes a list of gas station stelas linked to the personal account.

Stelas that are off-line are displayed in gray. Stelas that are on-line are displayed in green.
Overall view of the "Gas Station Stelas Display" zone

When a device is selected using the checkbox/tick at the top right of the device zone, a sidebar with additional settings will open.

Example of a sidebar with settings

The sidebar that appears allows: Removing the selection of a specific device using the "-" icon. Deleting all selected items using the trash can icon. Editing the installed LPG labels. Canceling the selection and thus deselecting all devices.

Device Settings

By clicking on the gas station stela field, you can open the stela's settings.

List of gas station stela settings

The list of gas station stela settings includes:

  • Editing stela parameters - allows changing the stela's parameters by clicking on the "Pencil" icon.
  • Deleting a stela - allows deleting a gas station stela by clicking on the "Trash Can" icon.
  • Network Converter - provides information about the network converter.
  • Current data from the controller - transmits current data from the controller.
  • Settings - in this section, you can enable or disable the synchronization of displayed information.
  • Location - this section provides information about the stela's location.
Network Converter

The user can go to the settings section titled "Network Converter".

Data from the "Network Converter" section.

In this section, they can find data about the network converter:

  1. Information can be obtained about: the status of the network converter, its MAC address, firmware version, and model.
  2. The ability to set a password for the TCP server and a password for managing the network converter. It's important to consider case sensitivity when entering.
It's advisable to record and save the entered passwords separately. If the user loses them, they will face difficulties in regaining access to the stela. In the event of losing access, the user will have to pay an additional fee and wait for access restoration.

Also, in the "Network Converter" section, an online reboot of the stela can be performed. There is a special button for this.

The "Reboot" button
Current Data from the Controller

After accessing the "Current Data from the Controller" settings, the user can view the current information about the gas station stela.

Example of parameters displayed in the "Current Data from the Controller" section.

The list of provided information includes:

  1. Information with a description of the fuel displayed on the board, including: the serial number, fuel cost value, a label about the type of fuel, and the presence of a "snowflake" on the fuel.
  2. The brightness level at which the gas station stela operates.
  3. The type of controller used in the gas station stela, with additional description.
  4. IP address of the gas station stela.
  5. The port number through which the gas station stela is connected.
  6. "Refresh" button - updates the information about the gas station stela and "Close" button - takes the user back one step.
"Snowflake" is an element displayed on the stela, indicating frost-resistant fuel at the gas station.
Examples of enabled and disabled snowflakes.

Additional Functionality

In the left sidebar, additional actions with the stelas can be implemented. Below is a list of possibilities for working with stelas:

  1. Add - allows describing and adding a stela to the personal account.
  2. Add Gas Station - allows adding a gas station and its data.

"Add" Functionality

When adding a gas station stela, it is necessary to fill in the parameters that will be added to the personal account.

"Add" functionality divided into zones

All the parameters needed for completion can be conditionally divided into two zones:

  1. Settings zone
  2. Device zone

After filling in all the fields, you need to click the "Save" button at the top. If the user needs to go back one step, they should click the "Cancel" button.

"Settings" Zone

The "Settings" zone includes a list of necessary parameters to be filled in.

Example of the "Settings" zone

This list includes:

  1. IP address - it's necessary to specify the IP address.
  2. Port - the user needs to specify the port.
  3. TCP server password - the user needs to set a password for the server.
  4. Password for managing the network converter - the user needs to set a password for the network converter.
  5. Name - it's necessary to specify the name of the stela.
  6. Address - indicate the actual location of the stela.
  7. Folder - the repository where information about the stela will be stored.
  8. Additional description - the possibility to manually add additional information about the gas station stela.
  9. Brightness - the ability to remotely set the brightness of the stela using a slider.

"Device" Zone

The "Device" zone also includes parameters to be filled in.

Example of parameters in the "Device" zone

These parameters include:

  1. Add new - allows adding a new line with stela parameters.
  2. Order - the serial number of the stela is entered.
  3. Value - the user needs to enter a value for the gas station stela.
  4. Label - allows the user to choose the type of fuel from a dropdown list.
  5. Snowflake - the option to enable a toggle/slider for marking winter fuel.
  6. Delete - removes the current line with stela parameters.
  7. Get current data - receive data from the connected gas station stela.

"Add Gas Station" Functionality

The "Add Gas Station" functionality allows the user to add a gas station to their personal account.

Overall view of the "Add Gas Station" functionality page

When adding a gas station, the user must fill in the following parameters:

  1. Name - the name of the gas station is specified.
  2. Identifier - the identifier of the gas station is entered.
  3. Folder - select the "folder" in which the gas station and its information will be stored.
  4. Additional description - the ability to create an additional description with details about the gas station.
  5. "Save" button - a button that allows saving added data and incorporating it into the personal account.
  6. "Cancel" button - allows cancelling all entered changes and returning to the previous step.

Final Result

Users understand how the "Gas Station Stelas" section works and know how to use this functionality to solve their tasks.