(Новая страница: «==== '''Device Settings''' ==== By clicking on the gas station stela field, you can open the stela's settings. center|thumb|List of gas station stela settings|800px The list of gas station stela settings includes: * Editing stela parameters - allows changing the stela's parameters by clicking on the "Pencil" icon. * Deleting a stela - allows deleting a gas station stela by clicking on the "Trash Can" icon. * Ne...»)
(Новая страница: «==== '''"Device" Zone''' ==== The "Device" zone also includes parameters to be filled in. center|thumb|Example of parameters in the "Device" zone|800px These parameters include: # Add new - allows adding a new line with stela parameters. # Order - the serial number of the stela is entered. # Value - the user needs to enter a value for the gas station stela. # Label - allows the user to choose the ty...»)
(не показаны 2 промежуточные версии этого же участника)
Строка 60:
Строка 60:
Also, in the "Network Converter" section, an online reboot of the stela can be performed. There is a special button for this.
Also, in the "Network Converter" section, an online reboot of the stela can be performed. There is a special button for this.
===== '''Current Data from the Controller''' =====
===== '''Текущие данные с контроллера ''' =====
After accessing the "Current Data from the Controller" settings, the user can view the current information about the gas station stela.
После перехода в настройки "Текущие данные с контроллера" пользователь сможет просмотреть текущую информацию о стеле АЗС.
[[File:Текущие_данные.png|center|thumb|Example of parameters displayed in the "Current Data from the Controller" section.|800px]]
[[File:Текущие_данные.png|center|thumb|Пример параметров отображаемых в разделе "Текущие данные с контроллера".|800px]]
The list of provided information includes:
В список предоставляемой информации входит:
# Information with a description of the fuel displayed on the board, including: the serial number, fuel cost value, a label about the type of fuel, and the presence of a "snowflake" on the fuel.
# Информация с описанием топлива выводимого на табло, с описанием: порядкового номера, значения стоимости топлива, метки о типе топливе и наличие "снежинки" у топлива.
# The brightness level at which the gas station stela operates.
# Яркость, с которой работает стела АЗС.
# The type of controller used in the gas station stela, with additional description.
# Тип контроллера используемый в стеле АЗС, с дополнительным описанием.
# IP address of the gas station stela.
# IP-адрес стелы АЗС.
# The port number through which the gas station stela is connected.
# Номер порта, через который подключена стела АЗС.
# "Refresh" button - updates the information about the gas station stela and "Close" button - takes the user back one step.
# Кнопка "Обновить"- обновляющая информацию о стеле АЗС и кнопка "Закрыть" - возвращает пользователя на шаг назад.
{{Note|"Snowflake" is an element displayed on the stela, indicating frost-resistant fuel at the gas station.
{{Note|"Снежинка" элемент отображаемый на стеле и указывающий на морозостойкое топливо на АЗС.
[[File:Снежинки.png|center|thumb|Examples of enabled and disabled snowflakes.|800px]]|warn}}
[[File:Снежинки.png|center|thumb|Примеры включенной и выключенной снежинки.|800px]]|warn}}
== '''Additional Functionality''' ==
== '''Дополнительная функциональность''' ==
In the left sidebar, additional actions with the stelas can be implemented.
В левом сайдбаре можно реализовать дополнительные действия со стелами.
Below is a list of possibilities for working with stelas:
Далее приведен список возможностей работы со стелами:
# Add - allows describing and adding a stela to the personal account.
# Добавить - позволяет описать и добавить стелу в личный кабинет.
# Add Gas Station - allows adding a gas station and its data.
# Добавить АЗС - позволяет добавить АЗС и данные о ней.
=== '''"Add" Functionality''' ===
</div>
When adding a gas station stela, it is necessary to fill in the parameters that will be added to the personal account.<br>
<div lang="ru" dir="ltr" class="mw-content-ltr">
[[File:Добавить_стелу_АЗС.png|center|thumb|"Add" functionality divided into zones|800px]]
=== '''Функциональность "Добавить"''' ===
All the parameters needed for completion can be conditionally divided into two zones:
При добавлении стелы АЗС необходимо заполнить параметры, которую будут добавлены в личный кабинет.<br>
# Settings zone
[[File:Добавить_стелу_АЗС.png|center|thumb|Функциональность "Добавить" разбитая на зоны|800px]]
# Device zone
Все параметры необходимые для заполнения можно условно разделить на две зоны:
After filling in all the fields, you need to click the "Save" button at the top. If the user needs to go back one step, they should click the "Cancel" button.
# Зона настройки
==== '''"Settings" Zone''' ====
# Зона устройства
The "Settings" zone includes a list of necessary parameters to be filled in.
После заполнения всех полей необходимо сверху нажать кнопку "Сохранить". Если пользователю необходимо вернуться на шаг назад необходимо сделать кнопку "Отменить".
[[File:Настройки_настройки.png|center|thumb|Example of the "Settings" zone|800px]]
==== '''Зона "Настройки"''' ====
This list includes:
Зона "Настройки" включает в себя список необходимых параметров для заполнения.
# IP address - it's necessary to specify the IP address.
[[File:Настройки_настройки.png|center|thumb|Пример зоны "Настройки"|800px]]
# Port - the user needs to specify the port.
В этот список входит:
# TCP server password - the user needs to set a password for the server.
# IP-адрес - необходимо прописать IP-адрес.
# Password for managing the network converter - the user needs to set a password for the network converter.
# Порт - пользователю необходимо указать порт.
# Name - it's necessary to specify the name of the stela.
# Пароль к TCP серверу - пользователю необходимо прописать пароль к серверу.
# Address - indicate the actual location of the stela.
# Пароль для управления сетевым преобразователем - пользователю необходимо прописать пароль для сетевого преобразователя.
# Folder - the repository where information about the stela will be stored.
# Название - необходимо прописать название стелы
# Additional description - the possibility to manually add additional information about the gas station stela.
# Адрес - указание фактического места расположения стелы.
# Brightness - the ability to remotely set the brightness of the stela using a slider.
# Папка - репозиторий в котором будет храниться информация о стеле.
==== '''"Device" Zone''' ====
# Дополнительное описание - возможность добавить вручную дополнительную информацию о стеле АЗС.
The "Device" zone also includes parameters to be filled in.
# Яркость - возможность удаленно выставить яркость стелы с помощью ползунка
[[File:Параметры_зоны_устройств.png|center|thumb|Example of parameters in the "Device" zone|800px]]
</div>
These parameters include:
<div lang="ru" dir="ltr" class="mw-content-ltr">
# Add new - allows adding a new line with stela parameters.
==== '''Зона "Устройство"''' ====
# Order - the serial number of the stela is entered.
Зона "Устройство" также включает в себя параметры для заполнения.
# Value - the user needs to enter a value for the gas station stela.
[[File:Параметры_зоны_устройств.png|center|thumb|Пример параметров зоны "Устройства"|800px]]
# Label - allows the user to choose the type of fuel from a dropdown list.
К этим параметрам относятся:
# Snowflake - the option to enable a toggle/slider for marking winter fuel.
# Добавить новое - позволяет добавить новую строку с параметрами стелы.
# Delete - removes the current line with stela parameters.
# Порядок - прописывается порядковый номер стелы.
# Get current data - receive data from the connected gas station stela.
# Значение - пользователю необходимо прописать значение для стелы АЗС.
=== '''"Add Gas Station" Functionality''' ===
# Метка - позволяет пользователю выбрать из всплывающего списка нужный вид топлива.
The "Add Gas Station" functionality allows the user to add a gas station to their personal account.
# Снежинка - возможно включить тумблер/ползунок для включения обозначения зимнего топлива.
[[File:Добавить_АЗС.png|center|thumb|Overall view of the "Add Gas Station" functionality page|800px]]
# Удалить - удалить текущую строку с параметрами стелы
When adding a gas station, the user must fill in the following parameters:
# Получить текущие данные - получить данные от подключенной стелы АЗС.
# Name - the name of the gas station is specified.
=== '''Функциональность "Добавить АЗС"''' ===
# Identifier - the identifier of the gas station is entered.
Функциональность "Добавить АЗС" позволяет добавить пользователю АЗС в личный кабинет.
# Folder - select the "folder" in which the gas station and its information will be stored.
[[File:Добавить_АЗС.png|center|thumb|Общий вид страницы функциональности "Добавить АЗС"|800px]]
# Additional description - the ability to create an additional description with details about the gas station.
При добавлении АЗС пользователь должен заполнить следующие параметры:
# "Save" button - a button that allows saving added data and incorporating it into the personal account.
# Название - указывается название АЗС.
# "Cancel" button - allows cancelling all entered changes and returning to the previous step.
In the SmartPlayer personal account, there is a special section - "Gas Station Stelas".
Overall view of the "Gas Station Stelas" section in the personal account
In this section, you can view available gas station stelas, as well as edit some parameters associated with the stelas.
The list of editable parameters will be described below.
Start Page
The start page of the "Gas Station Stelas" section can be divided into two zones.
Overall view of the start page of the "Gas Station Stela" section
These zones include:
"Display Settings" zone
"Gas Station Stelas Display" zone
Also, on the "start page," you can configure the settings of the gas station stela. To do this, you need to click on the stela itself. After clicking, a sidebar with settings will open.
In this case, to open the settings of the gas station stela, it is necessary to click not on the checkbox/tick in the top right corner of the stela field, but anywhere else in the stela field. Clicking on the checkbox will open other settings in the right sidebar, related to selecting the gas station stela.
"Display Settings" Zone
The "Display Settings" zone consists of parameters that allow changing the display of the device on the start page.
Overall view of the "Display Settings" zone
It includes:
Search bar - allows displaying the desired gas station stela by name.
Sorting - a list of sorting options for devices located in the personal account.
Device selection - functionality that allows to select or deselect all gas station stelas.
Device display - allows the user to choose how to display the available devices. The display options include: tile and list.
"Device Display" Zone
Example of "tile" display of a gas station stela.
The standard display of devices is in "Tile" format.
When switching to "List" format, the display of gas station stelas also changes. In this display format, parameters describing the gas station stela appear.
Selection - allows selecting an existing stela using a checkbox/tick.
Identifier - shows the identifier of the gas station stela.
Name - displays the name of the gas station stela.
Status - indicates the status of the gas station stela (ON-line/Off-line).
"Gas Station Stelas Display" Zone
The "Gas Station Stelas Display" zone includes a list of gas station stelas linked to the personal account.
Stelas that are off-line are displayed in gray. Stelas that are on-line are displayed in green.
Overall view of the "Gas Station Stelas Display" zone
When a device is selected using the checkbox/tick at the top right of the device zone, a sidebar with additional settings will open.
Example of a sidebar with settings
The sidebar that appears allows:
Removing the selection of a specific device using the "-" icon.
Deleting all selected items using the trash can icon.
Editing the installed LPG labels.
Canceling the selection and thus deselecting all devices.
Device Settings
By clicking on the gas station stela field, you can open the stela's settings.
List of gas station stela settings
The list of gas station stela settings includes:
Editing stela parameters - allows changing the stela's parameters by clicking on the "Pencil" icon.
Deleting a stela - allows deleting a gas station stela by clicking on the "Trash Can" icon.
Network Converter - provides information about the network converter.
Current data from the controller - transmits current data from the controller.
Settings - in this section, you can enable or disable the synchronization of displayed information.
Location - this section provides information about the stela's location.
Network Converter
The user can go to the settings section titled "Network Converter".
Data from the "Network Converter" section.
In this section, they can find data about the network converter:
Information can be obtained about: the status of the network converter, its MAC address, firmware version, and model.
The ability to set a password for the TCP server and a password for managing the network converter. It's important to consider case sensitivity when entering.
It's advisable to record and save the entered passwords separately. If the user loses them, they will face difficulties in regaining access to the stela. In the event of losing access, the user will have to pay an additional fee and wait for access restoration.
Also, in the "Network Converter" section, an online reboot of the stela can be performed. There is a special button for this.
The "Reboot" button
Current Data from the Controller
After accessing the "Current Data from the Controller" settings, the user can view the current information about the gas station stela.
Example of parameters displayed in the "Current Data from the Controller" section.
The list of provided information includes:
Information with a description of the fuel displayed on the board, including: the serial number, fuel cost value, a label about the type of fuel, and the presence of a "snowflake" on the fuel.
The brightness level at which the gas station stela operates.
The type of controller used in the gas station stela, with additional description.
IP address of the gas station stela.
The port number through which the gas station stela is connected.
"Refresh" button - updates the information about the gas station stela and "Close" button - takes the user back one step.
"Snowflake" is an element displayed on the stela, indicating frost-resistant fuel at the gas station.
Examples of enabled and disabled snowflakes.
Additional Functionality
In the left sidebar, additional actions with the stelas can be implemented.
Below is a list of possibilities for working with stelas:
Add - allows describing and adding a stela to the personal account.
Add Gas Station - allows adding a gas station and its data.
"Add" Functionality
When adding a gas station stela, it is necessary to fill in the parameters that will be added to the personal account.
"Add" functionality divided into zones
All the parameters needed for completion can be conditionally divided into two zones:
Settings zone
Device zone
After filling in all the fields, you need to click the "Save" button at the top. If the user needs to go back one step, they should click the "Cancel" button.
"Settings" Zone
The "Settings" zone includes a list of necessary parameters to be filled in.
Example of the "Settings" zone
This list includes:
IP address - it's necessary to specify the IP address.
Port - the user needs to specify the port.
TCP server password - the user needs to set a password for the server.
Password for managing the network converter - the user needs to set a password for the network converter.
Name - it's necessary to specify the name of the stela.
Address - indicate the actual location of the stela.
Folder - the repository where information about the stela will be stored.
Additional description - the possibility to manually add additional information about the gas station stela.
Brightness - the ability to remotely set the brightness of the stela using a slider.
"Device" Zone
The "Device" zone also includes parameters to be filled in.
Example of parameters in the "Device" zone
These parameters include:
Add new - allows adding a new line with stela parameters.
Order - the serial number of the stela is entered.
Value - the user needs to enter a value for the gas station stela.
Label - allows the user to choose the type of fuel from a dropdown list.
Snowflake - the option to enable a toggle/slider for marking winter fuel.
Delete - removes the current line with stela parameters.
Get current data - receive data from the connected gas station stela.
"Add Gas Station" Functionality
The "Add Gas Station" functionality allows the user to add a gas station to their personal account.
Overall view of the "Add Gas Station" functionality page
When adding a gas station, the user must fill in the following parameters:
Name - the name of the gas station is specified.
Identifier - the identifier of the gas station is entered.
Folder - select the "folder" in which the gas station and its information will be stored.
Additional description - the ability to create an additional description with details about the gas station.
"Save" button - a button that allows saving added data and incorporating it into the personal account.
"Cancel" button - allows cancelling all entered changes and returning to the previous step.
Final Result
Users understand how the "Gas Station Stelas" section works and know how to use this functionality to solve their tasks.
