Включение и выключение дисплея через личный кабинет/en: различия между версиями

Материал из SmartPlayer
(Новая страница: «== '''Situation Description''' == Inside the SmartPlayer platform, users have the ability to turn the device's display on and off through their personal account. This allows users to control device displays in online mode. {{Note|Currently, this is only applicable for Linux. |warn}} == '''Operational Logic''' == Users can turn the device's display on and off at any time through the SmartPlayer platform via their personal account.<br> To do this, one needs to...»)
(Новая страница: «=== '''Appearance of New Setting''' === After saving all the settings related to the COM port, the user needs to return to the device sidebar. A new icon "Turn off/on display" will appear there. thumb|center| The new icon "Turn off/on display"|800px Depending on the current state of the device, the color of its frame changes. <br> For example: while the device is on, the frame color is bright green. As soon as t...»)
 
(не показана 1 промежуточная версия этого же участника)
Строка 14: Строка 14:
By clicking on the "Settings" section, a comprehensive menu with settings will open for the user. From the list of settings that appear, the user needs to open the "Technical Parameters of COM Ports" block.
By clicking on the "Settings" section, a comprehensive menu with settings will open for the user. From the list of settings that appear, the user needs to open the "Technical Parameters of COM Ports" block.
[[File:Настройка_ком_портов.png|thumb|center| Adding COM ports|800px]]
[[File:Настройка_ком_портов.png|thumb|center| Adding COM ports|800px]]
<div lang="ru" dir="ltr" class="mw-content-ltr">
=== '''COM Port Configuration''' ===
=== '''Настройка COM-портов''' ===
When adding a COM port, the user needs to fill in all the fields in this block.
При добавлении COM-порта пользователю необходимо заполнить все поля в данном блоке.
{{Note|A system administrator on the user's side should assist with filling in the fields in the "Technical Parameters of COM Ports" block.|warn}}
{{Note|Пользователю с заполнением полей в блоке "Технические параметры COM-портов" должен помочь системный администратор  со стороны пользователя.|warn}}
This block consists of the following parameters:
Данный блок состоит из следующих параметров:
* Port Name - the only parameter to be entered manually by the user.<br>
* Имя порта - единственный параметр, прописываемый пользователем вручную.<br>
The other parameters are drop-down menus with a list of specified values and descriptions of these values.
Остальные параметры являются выпадающим окном со списком указанных значений и описанием данных значений.
* Data Transfer Rate
* Скорость передачи данных
[[File:Скорость_передачи_данных.png|thumb|center| Description of the "Data Transfer Rate" parameter|400px]]
[[File:Скорость_передачи_данных.png|thumb|center| Описание параметра "Скорость передачи данных"|400px]]
* Parity
* Четность
[[File:Параметр_четность.png|thumb|center| Description of the "Parity" parameter|400px]]
[[File:Параметр_четность.png|thumb|center| Описание параметр "Четность"|400px]]
* Data Bits
* Биты данных
[[File:Параметр_биты_данных.png|thumb|center| Description of the "Data Bits" parameter |400px]]
[[File:Параметр_биты_данных.png|thumb|center| Описание параметр "Биты данных" |400px]]  
* Stop Bits
* Стоп биты
[[File:Параметр_стоп_биты.png|thumb|center| Description of the "Stop Bits" parameter|400px]]
[[File:Параметр_стоп_биты.png|thumb|center| Описание параметра "Стоп биты"|400px]]
* Flow Control
* Управление потоком
[[File:Параметр_управления_потоком.png|thumb|center| Description of the "Flow Control" parameter|400px]]
[[File:Параметр_управления_потоком.png|thumb|center| Описание параметра "Управление потоком"|400px]]
* Action Selection
* Выбор действия
[[File:Параметр_выбор_действия.png|thumb|center| Adding description of the "Action Selection" parameter|400px]]
[[File:Параметр_выбор_действия.png|thumb|center| Добавление Описание параметра "Выбор действия"|400px]]
After setting all the parameters, it is necessary to click the "Save Changes" button at the bottom.
После выставления всех параметров необходимо внизу нажать кнопку "Сохранить изменения".
{{Note|To delete the current COM port settings, use the trash can icon.
{{Note|Удалить текущие выставленные настройки COM-порта можно по иконке корзины.
[[File:Выделенная иконка.png|thumb|center| The "Delete" icon.|800px]]|warn}}
[[File:Выделенная иконка.png|thumb|center| Иконка "Удалить".|800px]]|warn}}
=== '''Appearance of New Setting''' ===
</div>
After saving all the settings related to the COM port, the user needs to return to the device sidebar. A new icon "Turn off/on display" will appear there.
<div lang="ru" dir="ltr" class="mw-content-ltr">
[[File:Выключить_дисплей.png|thumb|center| The new icon "Turn off/on display"|800px]]
=== '''Появления новой настройки''' ===
Depending on the current state of the device, the color of its frame changes. <br>
После сохранения всех настроек, связанных с COM-портом, пользователю необходимо вернуться в сайдбар устройства. В нем появиться новая иконка "Выключить/включить дисплей".
For example: while the device is on, the frame color is bright green. As soon as the device is turned off, the color of the frame changes to dark green.
[[File:Выключить_дисплей.png|thumb|center| Новая иконка "Выключить/включить дисплей"|800px]]
[[File:Изменения_рамок.png|thumb|center| Frame changes depending on the device status.|800px]]
В зависимости от текущего состояния устройства цвет его рамки меняется. <br>
All available device statuses can be viewed by hovering over the "Device Statuses" line.
Например: пока устройство включено цвет у рамки - ярко-зеленый. Как только устройство будет выключено цвет у рамки поменяется на темно-зеленый.
[[File:Поиск_статуса_устройств.png|thumb|center| List of all device statuses|800px]]
[[File:Изменения_рамок.png|thumb|center| Изменение рамок в зависимости от статуса устройства.|800px]]
== '''Subtleties and Nuances''' ==
Все доступные статусы устройств можно просмотреть, наведя курсор на строку "Статусы устройств".
If the applied COM port settings are deleted using the button, then even with the display turned off, the device will be shown as online (having a green frame at the bottom). This is because, in the absence of COM port settings, there is no display monitoring on the device, and therefore it is shown as an online device.
[[File:Поиск_статуса_устройств.png|thumb|center| Список всех статусов устройств|800px]]
== '''Final Result''' ==
== '''Тонкости и нюансы''' ==
The user can turn the device display on and off in the personal account on Linux.
Если удалить примененные настройки COM-порта с помощью кнопки, то даже при выключенном дисплее устройство будет показываться on-line (иметь зеленую рамку снизу). Это связанно с тем, что при отсутствии настроек COM-порта на устройстве нет мониторинга дисплея, а следовательно оно показывается как on-line устройство.
== '''Итоговый результат''' ==
Пользователь может включить и выключить дисплей устройства в личном кабинете на Linux.
</div>

Текущая версия от 15:30, 22 декабря 2023

Situation Description

Inside the SmartPlayer platform, users have the ability to turn the device's display on and off through their personal account. This allows users to control device displays in online mode.

Currently, this is only applicable for Linux.

Operational Logic

Users can turn the device's display on and off at any time through the SmartPlayer platform via their personal account.
To do this, one needs to go to the "Devices" section and find the required online device.

Path to the "Devices" section and selecting a device with online status.
A device displayed as online has a green frame. An offline device has a gray frame
Differences between online and offline devices.

Next, the user needs to click on the online device to see the sidebar with settings.

Example of a sidebar with settings.

After the sidebar with settings appears, the user needs to select the "Settings" section and click on it.

The designated "Settings" section

By clicking on the "Settings" section, a comprehensive menu with settings will open for the user. From the list of settings that appear, the user needs to open the "Technical Parameters of COM Ports" block.

Adding COM ports

COM Port Configuration

When adding a COM port, the user needs to fill in all the fields in this block.

A system administrator on the user's side should assist with filling in the fields in the "Technical Parameters of COM Ports" block.

This block consists of the following parameters:

  • Port Name - the only parameter to be entered manually by the user.

The other parameters are drop-down menus with a list of specified values and descriptions of these values.

  • Data Transfer Rate
Description of the "Data Transfer Rate" parameter
  • Parity
Description of the "Parity" parameter
  • Data Bits
Description of the "Data Bits" parameter
  • Stop Bits
Description of the "Stop Bits" parameter
  • Flow Control
Description of the "Flow Control" parameter
  • Action Selection
Adding description of the "Action Selection" parameter

After setting all the parameters, it is necessary to click the "Save Changes" button at the bottom.

To delete the current COM port settings, use the trash can icon.
The "Delete" icon.

Appearance of New Setting

After saving all the settings related to the COM port, the user needs to return to the device sidebar. A new icon "Turn off/on display" will appear there.

The new icon "Turn off/on display"

Depending on the current state of the device, the color of its frame changes.
For example: while the device is on, the frame color is bright green. As soon as the device is turned off, the color of the frame changes to dark green.

Frame changes depending on the device status.

All available device statuses can be viewed by hovering over the "Device Statuses" line.

List of all device statuses

Subtleties and Nuances

If the applied COM port settings are deleted using the button, then even with the display turned off, the device will be shown as online (having a green frame at the bottom). This is because, in the absence of COM port settings, there is no display monitoring on the device, and therefore it is shown as an online device.

Final Result

The user can turn the device display on and off in the personal account on Linux.