SyncPlaylistWithDifferentContents/en: различия между версиями

Материал из SmartPlayer
(Новая страница: «== Platform Support == WebOS 3.2 / 4.0 / 4.1, starting from the version of the client application v1.28.0 and higher»)
(Новая страница: «== Bug fixes == If desynchronization is visually observed, you need to wait for a couple of playlist cycles to play. Synchronization may have been interrupted by...»)
 
(не показаны 3 промежуточные версии этого же участника)
Строка 11: Строка 11:
WebOS 3.2 / 4.0 / 4.1, starting from the version of the client application v1.28.0 and higher
WebOS 3.2 / 4.0 / 4.1, starting from the version of the client application v1.28.0 and higher


== Ограничения по проигрыванию ==
== Restrictions on playing ==
Трансляция с одной зоной. Могут быть небольшие задержки (до 300 мс) при переключении контентов (на стыке), это вызванно внутренними механизмами отрисовки UI на уровне операционной системы. Если нужна синхронизация кадр-в-кадр, нужно делать синхронизацию только из [[Videowall|видеороликов]], так как понятия кадра (frame) есть только у видеофайлов.
Broadcast with one zone. There may be slight delays (up to 300 ms) when switching contents (at the interface), this is caused by the internal rendering mechanisms of the UI at the operating system level. If you need frame-to-frame synchronization, you need to do synchronization only from [[Videowall | Videowall ]], since only video files have frame concepts.


== Настройка трансляции ==
== Broadcast setup ==
# Добавить новую трансляцию, выбрав Трансляции - Создать трансляцию.
# Add a new broadcast by choosing Broadcasts - Create Broadcast.
# Добавить новую зону в трансляцию, переместить в неё необходимые список контента.  
# Add a new zone to the broadcast, move the required content list to it.  


== Итоговый результат ==
== Final result ==
На группе устройств проигрывается плейлист синхронно по своей продолжительности.
A playlist is played on a group of devices synchronously in its duration.


== Исправление неполадок ==
== Bug fixes ==
Если визуально наблюдается рассинхронизация, нужно подождать проигрывания пары циклов плейлиста. Синхронизация могла быть нарушена сетевыми проблема или другими причинами. Дождитесь проигрывание примерно двух циклов плейлистов и синхронизация восстановится. Аналогичное поведение будет если к группе синхронизированных устройств подключается новый участник, нужно примерно 2 цикла плейлиста, чтобы он синхронизировался с группой.
If desynchronization is visually observed, you need to wait for a couple of playlist cycles to play. Synchronization may have been interrupted by a network problem or other reasons. Wait for about two cycles of playlists to play and synchronization will be restored. Similar behavior will be if a new member is connected to a group of synchronized devices, it takes about 2 playlist cycles for it to sync with the group.

Текущая версия от 23:38, 23 августа 2021

Другие языки:

Description

Synchronization of playlists - synchronization of playback of different types of content (videos, pictures, widgets) at the playlist level. In this case, it is guaranteed that all devices in the group that have synchronization enabled will play the playlist in the same time positions.

  1. Devices must be connected to RJ45 and be on the same LAN
  2. Create a group of devices, and move devices into it on which content synchronization is required
  3. Next, you need to configure this group: Settings → webOS platform → Synchronize content → Yes → Save changes

Platform Support

WebOS 3.2 / 4.0 / 4.1, starting from the version of the client application v1.28.0 and higher

Restrictions on playing

Broadcast with one zone. There may be slight delays (up to 300 ms) when switching contents (at the interface), this is caused by the internal rendering mechanisms of the UI at the operating system level. If you need frame-to-frame synchronization, you need to do synchronization only from Videowall , since only video files have frame concepts.

Broadcast setup

  1. Add a new broadcast by choosing Broadcasts - Create Broadcast.
  2. Add a new zone to the broadcast, move the required content list to it.

Final result

A playlist is played on a group of devices synchronously in its duration.

Bug fixes

If desynchronization is visually observed, you need to wait for a couple of playlist cycles to play. Synchronization may have been interrupted by a network problem or other reasons. Wait for about two cycles of playlists to play and synchronization will be restored. Similar behavior will be if a new member is connected to a group of synchronized devices, it takes about 2 playlist cycles for it to sync with the group.