Philips/en: различия между версиями

Материал из SmartPlayer
(Новая страница: «== Supported devices == Devices with OS Android 5+ <br>»)
(Новая страница: «For professional screens model 42BDL5055P # Download the SmartPlayer application and save it to a USB flash drive # Insert USB drive into the panel port # At the...»)
 
(не показаны 3 промежуточные версии этого же участника)
Строка 7: Строка 7:
Devices with OS Android 5+ <br>
Devices with OS Android 5+ <br>


Для уточнения по конкретным моделям отправляйте запрос на tech@smartplayer.org
For clarification on specific models, send a request to tech@smartplayer.org


== Начальная настройка ==
== Initial setup ==


Для коммерческих экранов модели 43HFL5011T/12
For commercial screens model 43HFL5011T / 12
#Если необходимо, первоначально настраиваете телевизор (выбор языка, региона и тп). Можно не настраивать, но чтобы везде был по крайней мере английский.
# If necessary, initially set up the TV (choice of language, region, etc.). It is not mandatory, but the menu shall be at least in English.
#После запуска телевизора ввести с пульта комбинацию 319753 mute. Откроется сервисное меню.
# After starting the TV, enter the combination 319753 mute from the remote control. The service menu will open.
#В сервисном меню необходимо осуществить настройку интернета.  
# In the service menu, you need to configure the Internet.
#В случае Ethernet вход RJ-45
# In case of Ethernet, RJ-45 input
#При подключение через Wi-Fi в сервисном меню переходим в пункт Wireless and Networks - Connect to Network - wireless и подключаем к доступной сети.
# When connecting via Wi-Fi in the service menu, go to the item Wireless and Networks - Connect to Network - wireless and connect to an available network.
#Скачать архив по [https://drive.google.com/file/d/1kMTwvSjW-7wnNtonNhe9-8YZU67CB8Bh/view?usp=sharing ссылке] и распаковать его в корень usb флешки.
# Download the archive using this [https://drive.google.com/file/d/1kMTwvSjW-7wnNtonNhe9-8YZU67CB8Bh/view?usp=sharing link] and unpack it to the root of the usb flash drive.
#Вставить флешку в usb порт в задней части панели.
# Insert the USB drive into the usb port at the back of the panel.
#В сервисном меню переходим в пункт Upgade and Clone - Clone USB to TV начнется установка приложения с флешки, по окончанию нажать Close
# In the service menu, go to Upgade and Clone - Clone USB to TV, the installation of the application from the flash drive will start, when finished, click Close
#Настройка автостарта приложения:Switch On settings - Feature Settings - App - Smart Player нужно подтвердить выбор Smart Player
# Setting the application autostart: Switch On settings - Feature Settings - App - Smart Player, you need to confirm the Smart Player selection
#После перезагрузки экрана приложение автоматически стартует
# After rebooting the screen, the application will automatically start


Для профессиональных экранов модели 42BDL5055P
For professional screens model 42BDL5055P
#Скачать и записать на USB флешку приложение SmartPlayer
# Download the SmartPlayer application and save it to a USB flash drive
#Вставить USB флешку в порт панели
# Insert USB drive into the panel port
#При первоначальном запуске экрана, необходимо настроить на нем интернет и время
# At the initial start of the screen, you need to configure the Internet Connection and time
#Набрать комбинацию на пульте HOME + 1888, экран перейдет в инженерное меню
# Dial the combination on the remote HOME + 1888, the screen will go to the engineering menu
#Перейти в пункт Apps
# Go to Apps
[[File:Photo 2019-03-05 15-27-47 (2).jpg|400px]] <br>
[[File:Photo 2019-03-05 15-27-47 (2).jpg|400px]] <br>
#Далее File Manager
#Then to File Manager
[[File:Photo 2019-03-05 15-27-47.jpg|400px]] <br>
[[File:Photo 2019-03-05 15-27-47.jpg|400px]] <br>
#Находим папку mnt
#Find mnt folder
[[File:Photo 2019-03-05 15-27-46.jpg|400px]] <br>
[[File:Photo 2019-03-05 15-27-46.jpg|400px]] <br>
#Далее usb_storage
#Then usb_storage
[[File:Photo 2019-03-05 15-27-45.jpg|400px]] <br>
[[File:Photo 2019-03-05 15-27-45.jpg|400px]] <br>
#Мы переходим в память флешки, находим там приложение SmartPlayer
#Go to the pen drive and find the SmartPlayer app
[[File:Photo 2019-03-05 15-27-43.jpg|400px]] <br>
[[File:Photo 2019-03-05 15-27-43.jpg|400px]] <br>
#Устанавливаем приложение SmartPlayer. После установки приложение запустится автоматически
# Install the SmartPlayer application. After the installation, the application will start automatically
[[File:Photo 2019-03-05 15-27-38.jpg|400px]] <br>
[[File:Photo 2019-03-05 15-27-38.jpg|400px]] <br>

Текущая версия от 14:56, 18 августа 2021

Другие языки:

Description

Professional panels Philips and commercial TVs with built-in player based on Android OS.

Supported devices

Devices with OS Android 5+

For clarification on specific models, send a request to tech@smartplayer.org

Initial setup

For commercial screens model 43HFL5011T / 12

  1. If necessary, initially set up the TV (choice of language, region, etc.). It is not mandatory, but the menu shall be at least in English.
  2. After starting the TV, enter the combination 319753 mute from the remote control. The service menu will open.
  3. In the service menu, you need to configure the Internet.
  4. In case of Ethernet, RJ-45 input
  5. When connecting via Wi-Fi in the service menu, go to the item Wireless and Networks - Connect to Network - wireless and connect to an available network.
  6. Download the archive using this link and unpack it to the root of the usb flash drive.
  7. Insert the USB drive into the usb port at the back of the panel.
  8. In the service menu, go to Upgade and Clone - Clone USB to TV, the installation of the application from the flash drive will start, when finished, click Close
  9. Setting the application autostart: Switch On settings - Feature Settings - App - Smart Player, you need to confirm the Smart Player selection
  10. After rebooting the screen, the application will automatically start

For professional screens model 42BDL5055P

  1. Download the SmartPlayer application and save it to a USB flash drive
  2. Insert USB drive into the panel port
  3. At the initial start of the screen, you need to configure the Internet Connection and time
  4. Dial the combination on the remote HOME + 1888, the screen will go to the engineering menu
  5. Go to Apps


  1. Then to File Manager


  1. Find mnt folder


  1. Then usb_storage


  1. Go to the pen drive and find the SmartPlayer app


  1. Install the SmartPlayer application. After the installation, the application will start automatically