Windows/en: различия между версиями

Материал из SmartPlayer
(Новая страница: «== Minimum requirements == * '' 'OS:' '' Windows 7, Windows 8 (8.1) or Windows 10. * '' 'Processor:' '' Intel Celeron 1.6 GHz (J3160). * '' 'RAM:' '' 2 GB. * '' '...»)
(Новая страница: «300px»)
 
(не показано 14 промежуточных версий 4 участников)
Строка 1: Строка 1:
<languages/>
<languages/>
== Minimum requirements ==
== Minimum requirements ==
* '' 'OS:' '' Windows 7, Windows 8 (8.1) or Windows 10.
* '''OS:''' Windows 7, Windows 8 (8.1) or Windows 10.
* '' 'Processor:' '' Intel Celeron 1.6 GHz (J3160).
* '''Processor:''' Intel Celeron 1.6 GHz (J3160).
* '' 'RAM:' '' 2 GB.
* '''RAM:''' 2 GB.
* '' 'Video card:' '' integrated Intel HD Graphics 400.
* '''Video card:''' integrated Intel HD Graphics 400.
* '' 'Disk space:' '' 35 GB.
* '''Disk space:''' 35 GB.


== Рекомендуемые устройства ==
== Recommended devices ==
Intel Nuc i3 и более производительные устройства.
*'''OS:''' Windows 10 IOT.
*'''Processor:''' Intel Core i3.
*'''RAM:''' 8 GB+.
*'''Video Card:''' Integrated Intel HD Graphics 400.
*'''Disk space:''' 100 GB.
<br>
E.g.: Intel Nuc i3 and higher performance devices.


== Установка ==
==<span id="InstallWindows"> Installing </span>==
Для установки Windows-клиента необходимо:
To install the Windows client, you need:<br>
#Настроить доступ в Интернет и выставить точное время с помощью NTP сервера, рекомендуется pool.ntp.org
1.Set up Internet access and set the exact time using an NTP server, it is recommended pool.ntp.org<br>
#Запустить с административными правами установочный пакет SmartPlayer
2.Run the SmartPlayer<br> installation package with administrative rights
#Установка должна производиться в корневой каталог, путь C:\SmartPlayer
3.After running the .Exe file, the system displays a warning. Click "More Info" then "Run Anyway"<br>
#В свойствах файла SmartPlayer.exe в закладке "Совместимость" установить "Выполнять эту программу от имени администратора"
[[File:Alert.png|mini|left]] br><br><br><br><br>
#Настроить автозапуск приложения SmartPlayer при старте Windows
4.After approval, the system will ask you to select the language that will be used during the installation process. Select the language and click "OK"<br>
[[File:Wind1.png|mini|left]] br>
5.The system will open an installation window with information about the version being installed and a link to the installation instructions. Click "Install"<br>
[[File:Wind2.png|mini|left]] br>
6. In the new window, select whether you want to create an icon on the desktop and click "Next".<br>
[[File:Wind3.png|mini|left]] br><br><br>
7.The installation of SmartPlayer on the device will begin. Do not close the window until installation is complete.<br>
[[File:Wind4.png|mini|left]] br><br><br>
8.After the installation is complete, the system will prompt you to run the application. Click "Finish".<br>
[[File:Wind5.png|mini|left]] br><br><br>
9.Configure the power options and screen saver according to the instructions *[[Windows/LockScreen|Disable screen saver and sleep mode]]


== Вертикальная ориентация ==
== Disable kiosk mode ==
Для установки вертикальной ориентации необходимо:
To disable kiosk mode, you must press the combination ctrl + f12
#Зайти в панель управления
#Выбрать пункт экран- разрешение экрана- ориентация
#Далее изменить ориентацию на устройстве


== Отключение уведомлений ==
== Registering a device without creating a virtual device ==
''Windows 8''
If you '''DO NOT''' use a virtual device in your Personal Account for pre-configuration, then in order for the registration code to appear, you must exit the kiosk mode (ctrl+f12) and click on the "cross" on the virtual keyboard
#Нажмите  Win+R, введите команду regedit и нажмите на кнопку «ОК».
#Перейдите по следующему пути: HKEY_CURRENT_USER\SOFTWARE\Policies\Microsoft\Windows\Explorer
#Найдите ключ «Explorer», или создайте его. Для этого нажмите правой кнопкой мыши на ключ «Windows», выберите «Создать» > «Ключ» и назовите его «Explorer» (без кавычек).
#Откройте созданный ключ «Explorer», щёлкните правой кнопкой мыши по правой стороне его окна, нажмите на «Создать» и выберите «DWORD (32-бит)». Назовите его «DisableNotificationCenter» (без кавычек).
#Дважды щёлкните по только что созданному значению и в поле введите 1.
#Перезагрузите компьютер. После этого «Центр уведомлений» должен исчезнуть.
''Windows 10''
#Нажмите  Win+R, введите команду regedit и нажмите на кнопку «ОК».
#Перейдите по следующему пути: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\PushNotifications
#Кликните правой кнопкой мыши в правой части редактора и выберите создать — параметр DWORD 32 бита. Задайте ему имя ToastEnabled, а в качестве значения оставьте 0 (ноль).
#Перезагрузите компьютер. После этого «Центр уведомлений» должен исчезнуть.


[[Файл:Virtual device.png|900px]]


== Отключение режима киоса ==
== Vertical orientation ==
Для отключения режима киоска, необходимо нажать комбинация ctrl+f12
To set vertical orientation you need:
# Go to the control panel
# Select item screen-screen resolution-orientation
# Next, change the orientation on the device.


== Запуск на слабом железе ==
== Disable screensaver and sleep mode ==
При работе на компьютерах со слабыми характеристиками возможны зависания и "подтормаживания" видео, для того что бы добиться большей производительности необходимо:
*[[Windows/LockScreen|Windows 10]]
#Загрузить видео во встроенный в личном кабинете видеоредактор, изменить в редакторе битрейд видео на доступный (в зависимости от требуемого качества), обработать его и сохранить, в трансляции использовать обработанное видео.
 
#В личном кабинете зайти в настройки устройства и '''включить''' аппаратное ускорение. Настройки - Аппаратное ускорение - сохранить.
== Disabling notifications ==
'' Windows 8 ''
# Press Win + R, enter the "regedit" command and click on the "OK" button.
# Navigate to the following path: HKEY_CURRENT_USER \ SOFTWARE \ Policies \ Microsoft \ Windows \ Explorer
# Find the "Explorer" key, or create one. To do this, right-click on the Windows key, choose New> Key and name it Explorer (without quotes).
# Open the created key "Explorer", right-click on the right side of its window, click on "New" and select "DWORD (32-bit)". Name it "DisableNotificationCenter" (without quotes).
# Double click on the value you just created and enter 1 in the field.
# Restart your computer. After that, the "Action Center" should disappear.
'' Windows 10 ''
# Press Win + R, enter the "regedit" command and click on the "OK" button.
# Navigate to the following path: HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ PushNotifications
# Right click on the right side of the editor and select New - 32 bit DWORD parameter. Call it ToastEnabled and leave 0 (zero) as the value.
# Restart your computer. After that, the "Action Center" should disappear.
 
== Start UDP/RTP/RTSP stream ==
Starting from version v1.84.3, settings for playing UDP/RTP/RTSP are supported. If you have problems playing UDP/RTS/RTSP stream through your personal account, add settings for the device (Select device -> Settings -> Video player settings):
Settings add without "", here they are given to save the formatting.
* ":sout-udp-caching=1000"
* ":no-ts-trust-pcr"
* ":ts-seek-percent"
* ":demux=ffmpeg"
 
[[Файл:Image-20210319-062106.png|300px]]
 
== Run on weak hardware ==
When working on computers with poor performance, video freezes and "slowdowns" are possible, in order to achieve better performance it is necessary:
#Upload the video to the built-in video editor in your personal account, change the video bitrate to available in the editor (depending on the required quality), process it and save it, use the processed video in the broadcast.
#In your personal account, go to the device settings and '''enable''' hardware acceleration. Settings - Hardware acceleration - save.
[[File:21d2054fca88d7ae0fe8e8baada86184.png|300px]]
[[File:21d2054fca88d7ae0fe8e8baada86184.png|300px]]
#Если используется не внешняя видеокарта, а intel встроенная, то обновить драйверы графики. Их можно скачать с официального сайта по ссылке [https://downloadcenter.intel.com/ru/product/80939].
#If you are not using an external video card, but an intel built-in one, then update the graphics drivers. They can be downloaded from the official website at the link [https://downloadcenter.intel.com/ru/product/80939].
#Использовать формат mkv
#Use mkv format


== Touch & Watch ==
The Windows SmartPlayer application implements a trigger event using RFID tags. See '' [[Touch_%26_Watch/en | Touch & Watch]] ''


== Touch & Watch ==
== Run on Matrox graphics cards ==
В Windows приложении SmartPlayer реализовано триггерное срабатывание событие с помощью RFID меток. См. ''[[Touch & Watch]]''
To run on devices with professional Matrox graphics cards, you need to install a SPECIAL ASSEMBLY of the client application, which can be requested from your manager at SmartPlayer.

Текущая версия от 17:33, 20 июля 2023

Другие языки:

Minimum requirements

  • OS: Windows 7, Windows 8 (8.1) or Windows 10.
  • Processor: Intel Celeron 1.6 GHz (J3160).
  • RAM: 2 GB.
  • Video card: integrated Intel HD Graphics 400.
  • Disk space: 35 GB.

Recommended devices

  • OS: Windows 10 IOT.
  • Processor: Intel Core i3.
  • RAM: 8 GB+.
  • Video Card: Integrated Intel HD Graphics 400.
  • Disk space: 100 GB.


E.g.: Intel Nuc i3 and higher performance devices.

Installing

To install the Windows client, you need:
1.Set up Internet access and set the exact time using an NTP server, it is recommended pool.ntp.org
2.Run the SmartPlayer
installation package with administrative rights 3.After running the .Exe file, the system displays a warning. Click "More Info" then "Run Anyway"

mini
mini

br>



4.After approval, the system will ask you to select the language that will be used during the installation process. Select the language and click "OK"

mini
mini

br>

5.The system will open an installation window with information about the version being installed and a link to the installation instructions. Click "Install"

mini
mini

br>

6. In the new window, select whether you want to create an icon on the desktop and click "Next".

mini
mini

br>

7.The installation of SmartPlayer on the device will begin. Do not close the window until installation is complete.

mini
mini

br>

8.After the installation is complete, the system will prompt you to run the application. Click "Finish".

mini
mini

br>

9.Configure the power options and screen saver according to the instructions *Disable screen saver and sleep mode

Disable kiosk mode

To disable kiosk mode, you must press the combination ctrl + f12

Registering a device without creating a virtual device

If you DO NOT use a virtual device in your Personal Account for pre-configuration, then in order for the registration code to appear, you must exit the kiosk mode (ctrl+f12) and click on the "cross" on the virtual keyboard

Vertical orientation

To set vertical orientation you need:

  1. Go to the control panel
  2. Select item screen-screen resolution-orientation
  3. Next, change the orientation on the device.

Disable screensaver and sleep mode

Disabling notifications

Windows 8

  1. Press Win + R, enter the "regedit" command and click on the "OK" button.
  2. Navigate to the following path: HKEY_CURRENT_USER \ SOFTWARE \ Policies \ Microsoft \ Windows \ Explorer
  3. Find the "Explorer" key, or create one. To do this, right-click on the Windows key, choose New> Key and name it Explorer (without quotes).
  4. Open the created key "Explorer", right-click on the right side of its window, click on "New" and select "DWORD (32-bit)". Name it "DisableNotificationCenter" (without quotes).
  5. Double click on the value you just created and enter 1 in the field.
  6. Restart your computer. After that, the "Action Center" should disappear.

Windows 10

  1. Press Win + R, enter the "regedit" command and click on the "OK" button.
  2. Navigate to the following path: HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ PushNotifications
  3. Right click on the right side of the editor and select New - 32 bit DWORD parameter. Call it ToastEnabled and leave 0 (zero) as the value.
  4. Restart your computer. After that, the "Action Center" should disappear.

Start UDP/RTP/RTSP stream

Starting from version v1.84.3, settings for playing UDP/RTP/RTSP are supported. If you have problems playing UDP/RTS/RTSP stream through your personal account, add settings for the device (Select device -> Settings -> Video player settings): Settings add without "", here they are given to save the formatting.

  • ":sout-udp-caching=1000"
  • ":no-ts-trust-pcr"
  • ":ts-seek-percent"
  • ":demux=ffmpeg"

Run on weak hardware

When working on computers with poor performance, video freezes and "slowdowns" are possible, in order to achieve better performance it is necessary:

  1. Upload the video to the built-in video editor in your personal account, change the video bitrate to available in the editor (depending on the required quality), process it and save it, use the processed video in the broadcast.
  2. In your personal account, go to the device settings and enable hardware acceleration. Settings - Hardware acceleration - save.

  1. If you are not using an external video card, but an intel built-in one, then update the graphics drivers. They can be downloaded from the official website at the link [1].
  2. Use mkv format

Touch & Watch

The Windows SmartPlayer application implements a trigger event using RFID tags. See Touch & Watch

Run on Matrox graphics cards

To run on devices with professional Matrox graphics cards, you need to install a SPECIAL ASSEMBLY of the client application, which can be requested from your manager at SmartPlayer.