Раздел "Стелы АЗС"/en: различия между версиями

Материал из SmartPlayer
(Новая страница: «===== '''Current Data from the Controller''' ===== After accessing the "Current Data from the Controller" settings, the user can view the current information about the gas station stela. center|thumb|Example of parameters displayed in the "Current Data from the Controller" section.|800px The list of provided information includes: # Information with a description of the fuel displayed on the board, including: the seria...»)
(Новая страница: «=== '''"Add" Functionality''' === When adding a gas station stela, it is necessary to fill in the parameters that will be added to the personal account.<br> center|thumb|"Add" functionality divided into zones|800px All the parameters needed for completion can be conditionally divided into two zones: # Settings zone # Device zone After filling in all the fields, you need to click the "Save" button at the top. If...»)
Строка 77: Строка 77:
# Add - allows describing and adding a stela to the personal account.
# Add - allows describing and adding a stela to the personal account.
# Add Gas Station - allows adding a gas station and its data.
# Add Gas Station - allows adding a gas station and its data.
<div lang="ru" dir="ltr" class="mw-content-ltr">
=== '''"Add" Functionality''' ===
=== '''Функциональность "Добавить"''' ===
When adding a gas station stela, it is necessary to fill in the parameters that will be added to the personal account.<br>
При добавлении стелы АЗС необходимо заполнить параметры, которую будут добавлены в личный кабинет.<br>
[[File:Добавить_стелу_АЗС.png|center|thumb|"Add" functionality divided into zones|800px]]
[[File:Добавить_стелу_АЗС.png|center|thumb|Функциональность "Добавить" разбитая на зоны|800px]]
All the parameters needed for completion can be conditionally divided into two zones:
Все параметры необходимые для заполнения можно условно разделить на две зоны:
# Settings zone
# Зона настройки
# Device zone
# Зона устройства
After filling in all the fields, you need to click the "Save" button at the top. If the user needs to go back one step, they should click the "Cancel" button.
После заполнения всех полей необходимо сверху нажать кнопку "Сохранить". Если пользователю необходимо вернуться на шаг назад необходимо сделать кнопку "Отменить".
==== '''"Settings" Zone''' ====
==== '''Зона "Настройки"''' ====
The "Settings" zone includes a list of necessary parameters to be filled in.
Зона "Настройки" включает в себя список необходимых параметров для заполнения.
[[File:Настройки_настройки.png|center|thumb|Example of the "Settings" zone|800px]]
[[File:Настройки_настройки.png|center|thumb|Пример зоны "Настройки"|800px]]
This list includes:
В этот список входит:
# IP address - it's necessary to specify the IP address.
# IP-адрес - необходимо прописать IP-адрес.
# Port - the user needs to specify the port.
# Порт - пользователю необходимо указать порт.
# TCP server password - the user needs to set a password for the server.
# Пароль к TCP серверу - пользователю необходимо прописать пароль к серверу.
# Password for managing the network converter - the user needs to set a password for the network converter.
# Пароль для управления сетевым преобразователем - пользователю необходимо прописать пароль для сетевого преобразователя.
# Name - it's necessary to specify the name of the stela.
# Название - необходимо прописать название стелы
# Address - indicate the actual location of the stela.
# Адрес - указание фактического места расположения стелы.
# Folder - the repository where information about the stela will be stored.
# Папка - репозиторий в котором будет храниться информация о стеле.
# Additional description - the possibility to manually add additional information about the gas station stela.
# Дополнительное описание - возможность добавить вручную дополнительную информацию о стеле АЗС.
# Brightness - the ability to remotely set the brightness of the stela using a slider.
# Яркость - возможность удаленно выставить яркость стелы с помощью ползунка
</div>
<div lang="ru" dir="ltr" class="mw-content-ltr">
<div lang="ru" dir="ltr" class="mw-content-ltr">
==== '''Зона "Устройство"''' ====
==== '''Зона "Устройство"''' ====

Версия от 16:07, 7 декабря 2023

"Gas Station Stelas" Section

In the SmartPlayer personal account, there is a special section - "Gas Station Stelas".

Overall view of the "Gas Station Stelas" section in the personal account

In this section, you can view available gas station stelas, as well as edit some parameters associated with the stelas.
The list of editable parameters will be described below.

Start Page

The start page of the "Gas Station Stelas" section can be divided into two zones.

Overall view of the start page of the "Gas Station Stela" section

These zones include: "Display Settings" zone "Gas Station Stelas Display" zone Also, on the "start page," you can configure the settings of the gas station stela. To do this, you need to click on the stela itself. After clicking, a sidebar with settings will open.

In this case, to open the settings of the gas station stela, it is necessary to click not on the checkbox/tick in the top right corner of the stela field, but anywhere else in the stela field. Clicking on the checkbox will open other settings in the right sidebar, related to selecting the gas station stela.

"Display Settings" Zone

The "Display Settings" zone consists of parameters that allow changing the display of the device on the start page.

Overall view of the "Display Settings" zone

It includes:

  1. Search bar - allows displaying the desired gas station stela by name.
  2. Sorting - a list of sorting options for devices located in the personal account.
  3. Device selection - functionality that allows to select or deselect all gas station stelas.
  4. Device display - allows the user to choose how to display the available devices. The display options include: tile and list.

"Device Display" Zone

Example of "tile" display of a gas station stela.

The standard display of devices is in "Tile" format.
When switching to "List" format, the display of gas station stelas also changes. In this display format, parameters describing the gas station stela appear.

Файл:Список плиткой..png
Device display when switching to "List" format view

These parameters include:

  • Selection - allows selecting an existing stela using a checkbox/tick.
  • Identifier - shows the identifier of the gas station stela.
  • Name - displays the name of the gas station stela.
  • Status - indicates the status of the gas station stela (ON-line/Off-line).

"Gas Station Stelas Display" Zone

The "Gas Station Stelas Display" zone includes a list of gas station stelas linked to the personal account.

Stelas that are off-line are displayed in gray. Stelas that are on-line are displayed in green.
Overall view of the "Gas Station Stelas Display" zone

When a device is selected using the checkbox/tick at the top right of the device zone, a sidebar with additional settings will open.

Example of a sidebar with settings

The sidebar that appears allows: Removing the selection of a specific device using the "-" icon. Deleting all selected items using the trash can icon. Editing the installed LPG labels. Canceling the selection and thus deselecting all devices.

Device Settings

By clicking on the gas station stela field, you can open the stela's settings.

List of gas station stela settings

The list of gas station stela settings includes:

  • Editing stela parameters - allows changing the stela's parameters by clicking on the "Pencil" icon.
  • Deleting a stela - allows deleting a gas station stela by clicking on the "Trash Can" icon.
  • Network Converter - provides information about the network converter.
  • Current data from the controller - transmits current data from the controller.
  • Settings - in this section, you can enable or disable the synchronization of displayed information.
  • Location - this section provides information about the stela's location.
Network Converter

The user can go to the settings section titled "Network Converter".

Data from the "Network Converter" section.

In this section, they can find data about the network converter:

  1. Information can be obtained about: the status of the network converter, its MAC address, firmware version, and model.
  2. The ability to set a password for the TCP server and a password for managing the network converter. It's important to consider case sensitivity when entering.
It's advisable to record and save the entered passwords separately. If the user loses them, they will face difficulties in regaining access to the stela. In the event of losing access, the user will have to pay an additional fee and wait for access restoration.

Also, in the "Network Converter" section, an online reboot of the stela can be performed. There is a special button for this.

The "Reboot" button
Current Data from the Controller

After accessing the "Current Data from the Controller" settings, the user can view the current information about the gas station stela.

Example of parameters displayed in the "Current Data from the Controller" section.

The list of provided information includes:

  1. Information with a description of the fuel displayed on the board, including: the serial number, fuel cost value, a label about the type of fuel, and the presence of a "snowflake" on the fuel.
  2. The brightness level at which the gas station stela operates.
  3. The type of controller used in the gas station stela, with additional description.
  4. IP address of the gas station stela.
  5. The port number through which the gas station stela is connected.
  6. "Refresh" button - updates the information about the gas station stela and "Close" button - takes the user back one step.
"Snowflake" is an element displayed on the stela, indicating frost-resistant fuel at the gas station.
Examples of enabled and disabled snowflakes.

Additional Functionality

In the left sidebar, additional actions with the stelas can be implemented. Below is a list of possibilities for working with stelas:

  1. Add - allows describing and adding a stela to the personal account.
  2. Add Gas Station - allows adding a gas station and its data.

"Add" Functionality

When adding a gas station stela, it is necessary to fill in the parameters that will be added to the personal account.

"Add" functionality divided into zones

All the parameters needed for completion can be conditionally divided into two zones:

  1. Settings zone
  2. Device zone

After filling in all the fields, you need to click the "Save" button at the top. If the user needs to go back one step, they should click the "Cancel" button.

"Settings" Zone

The "Settings" zone includes a list of necessary parameters to be filled in.

Example of the "Settings" zone

This list includes:

  1. IP address - it's necessary to specify the IP address.
  2. Port - the user needs to specify the port.
  3. TCP server password - the user needs to set a password for the server.
  4. Password for managing the network converter - the user needs to set a password for the network converter.
  5. Name - it's necessary to specify the name of the stela.
  6. Address - indicate the actual location of the stela.
  7. Folder - the repository where information about the stela will be stored.
  8. Additional description - the possibility to manually add additional information about the gas station stela.
  9. Brightness - the ability to remotely set the brightness of the stela using a slider.

Зона "Устройство"

Зона "Устройство" также включает в себя параметры для заполнения.

Пример параметров зоны "Устройства"

К этим параметрам относятся:

  1. Добавить новое - позволяет добавить новую строку с параметрами стелы.
  2. Порядок - прописывается порядковый номер стелы.
  3. Значение - пользователю необходимо прописать значение для стелы АЗС.
  4. Метка - позволяет пользователю выбрать из всплывающего списка нужный вид топлива.
  5. Снежинка - возможно включить тумблер/ползунок для включения обозначения зимнего топлива.
  6. Удалить - удалить текущую строку с параметрами стелы
  7. Получить текущие данные - получить данные от подключенной стелы АЗС.

Функциональность "Добавить АЗС"

Функциональность "Добавить АЗС" позволяет добавить пользователю АЗС в личный кабинет.

Общий вид страницы функциональности "Добавить АЗС"

При добавлении АЗС пользователь должен заполнить следующие параметры:

  1. Название - указывается название АЗС.
  2. Идентификатор - прописывается идентификатор АЗС.
  3. Папка - выбирается "папка", в которой будет храниться АЗС и информация о ней.
  4. Дополнительное описание - возможность создать дополнительное описание с подробностями об АЗС.
  5. Кнопка "Сохранить" - кнопка позволяющая сохранять добавленные данные и вносить их в личный кабинет.
  6. Кнопка "Отменить" - позволяет отменить все внесенные изменений и вернуться на предыдущий шаг.

Итоговый результат

Пользователи понимают, как работает раздел "Стелы АЗС" и умеют использовать данный функционал для решения своих задач.