(Новая страница: «== '''Situation Description''' == In the "Announcements" section of the personal account, users now have the option to insert ads into the broadcast. One of the available insertion options is the type "Advertisers".<br> This insertion type allows the user to embed an ad into the broadcast so that part of the ad content is integrated into the broadcast and mixed with the broadcast content. The transition between the ad content and the broadcast content is sea...»)
(Новая страница: «=== '''Playback Types''' === There are three types of settings available in this parameter: # Between Broadcast Content - allows you to add an ad to the current broadcast schedule after the list of broadcast content has played # At a Specific Time - allows you to add an ad to the current broadcast schedule. During the ad playback, the current broadcast will be paused, and after the ad has fully played, the broadcast will resume from where it was paused. # Ad...»)
Строка 13:
Строка 13:
After clicking on the create category, a window for creating an ad will open. In the process of creating an ad, the user needs to select a specific "Playback Type" so that the ad playback works at the end of the broadcast cycle. In this case, the required playback type is - '''"Advertisers"'''.
After clicking on the create category, a window for creating an ad will open. In the process of creating an ad, the user needs to select a specific "Playback Type" so that the ad playback works at the end of the broadcast cycle. In this case, the required playback type is - '''"Advertisers"'''.
[[File:Рекламщики.png|thumb|center| Example of the "Playback Type" parameter when creating an ad.|800px]]
[[File:Рекламщики.png|thumb|center| Example of the "Playback Type" parameter when creating an ad.|800px]]
<div lang="ru" dir="ltr" class="mw-content-ltr">
=== '''Playback Types''' ===
=== '''Типы проигрывания''' ===
There are three types of settings available in this parameter:
В данном параметры доступны три типа настройки:
# Between Broadcast Content - allows you to add an ad to the current broadcast schedule after the list of broadcast content has played
# Между контентом трансляции - позволяет добавить объявление в текущую эфирную сетку трансляции, после проигрывания списка контента из трансляции
# At a Specific Time - allows you to add an ad to the current broadcast schedule. During the ad playback, the current broadcast will be paused, and after the ad has fully played, the broadcast will resume from where it was paused.
# В определенное время - позволяет добавить объявление в текущую эфирную сетку трансляции. Во время проигрывания объявления, текущая трансляция будет приостановлена, а после полного проигрывания объявления трансляция будет продолжена с момента, на котором была остановлена.
# Advertisers - allows you to add an ad to the current broadcast schedule. The ad will be replaced with fillers located in the selected broadcast time interval. '''(this option is necessary).'''
# Рекламщики - позволяет добавить объявление в текущую эфирную сетку трансляции. Объявление будет заменено на филлеры, которые расположены в выбранном интервале времени трансляции.'''(этот вариант является нужным).'''
[[File: Выбор_режима.png|thumb|center| List of playback types available when creating an ad|800px]]
[[File:Выбор_режима.png|thumb|center| Список типов проигрывания доступных при создании объявления|800px]]
Next, you need to perform the other stages of setting the parameters required for creating an ad. These parameters can be found in the article [[Ad Creation|Announcements]].
Далее необходимо произвести остальные этапы настройки параметров, которые необходимы для создания объявления. С этими параметрами можно ознакомиться в статье [[Создание объявлений|Объявления]].
=== '''Content Setup for the Ad''' ===
=== '''Настройка контента для объявления''' ===
{{Note|After selecting the content on the main page, the user has the option to edit it. To do this, click on the "Edit" icon in the form of a pencil in the right toolbar to open the content parameters window.
{{Note|После выбора контента на главной странице, у пользователя есть возможность отредактировать его. Для этого необходимо в правом тулбаре нажать на иконку "Изменить" в виде карандаша, чтобы открыть окно с параметрами контента.
[[File: Карандаш.png|thumb|center| Example of the "Edit" icon.|800px]]
[[File:Карандаш.png|thumb|center| Пример отображения иконки "Изменить".|800px]]
After clicking, the user will see a window that allows them to change the following parameters:
После нажатия пользователю откроется окно, которое позволит изменить следующие параметры:
* Duration - indicates the length of the content in seconds
* Продолжительность - указывается длина контента в секундах
* Playback Frequency - shows the ratio of the ad content to the main broadcast. In this case, with a value of "1", the ad content will appear once in the broadcast and replace a certain segment of the broadcast. With a value of 1/2, the content will be shown once in every two full broadcast cycles, replacing a certain segment in the first broadcast.
* Частота выхода - показывает соотношение выхода контента из объявления в основную трансляцию. В данном случае при значении "1" контент из объявления покажется один раз в трансляции и заменит определенный фрагмент трансляции. При значении 1/2 контент будет показан один раз в два полноценных цикла проигрывания трансляции с заменой определенного фрагмента в первой трансляции.
[[File: Продолжительность_и_частота.png|thumb|center| Example of content parameters in the ad.|800px]] |warn}}
[[File:Продолжительность_и_частота.png|thumb|center| Пример отображения параметров для контента в объявлении.|800px]] |warn}}
== '''Video Instruction''' ==
== '''Видеоинструкция''' ==
[https://www.youtube.com/watch?v=F3fb_kxUjZQ Playback Type "Advertisers"]
[https://www.youtube.com/watch?v=F3fb_kxUjZQ Тип проигрывания "Рекламщики"]
== '''Final Outcome''' ==
== '''Итоговый результат''' ==
The user understands the differences between ad insertion types and knows how to use the required types in the broadcast.
Пользователь понимает различия между типами вставки объявлений и умеет использовать нужные ему типы в трансляции.
In the "Announcements" section of the personal account, users now have the option to insert ads into the broadcast. One of the available insertion options is the type "Advertisers".
This insertion type allows the user to embed an ad into the broadcast so that part of the ad content is integrated into the broadcast and mixed with the broadcast content. The transition between the ad content and the broadcast content is seamless.
Operating Principle
First, the user needs to prepare a broadcast with a schedule so that they can later add ads at the end of the broadcast cycle.
The ability to create a broadcast and schedule can be found via the links:
Next, the user needs to log into their personal account and go to the "Announcements" section.
Example of the "Announcements" section in the personal account.
The next step is to select the "Create" category.
Example of the "Create" category in the "Announcements" section of the personal account.
After clicking on the create category, a window for creating an ad will open. In the process of creating an ad, the user needs to select a specific "Playback Type" so that the ad playback works at the end of the broadcast cycle. In this case, the required playback type is - "Advertisers".
Example of the "Playback Type" parameter when creating an ad.
Playback Types
There are three types of settings available in this parameter:
Between Broadcast Content - allows you to add an ad to the current broadcast schedule after the list of broadcast content has played
At a Specific Time - allows you to add an ad to the current broadcast schedule. During the ad playback, the current broadcast will be paused, and after the ad has fully played, the broadcast will resume from where it was paused.
Advertisers - allows you to add an ad to the current broadcast schedule. The ad will be replaced with fillers located in the selected broadcast time interval. (this option is necessary).
List of playback types available when creating an ad
Next, you need to perform the other stages of setting the parameters required for creating an ad. These parameters can be found in the article Announcements.
Content Setup for the Ad
After selecting the content on the main page, the user has the option to edit it. To do this, click on the "Edit" icon in the form of a pencil in the right toolbar to open the content parameters window.
Example of the "Edit" icon.
After clicking, the user will see a window that allows them to change the following parameters:
Duration - indicates the length of the content in seconds
Playback Frequency - shows the ratio of the ad content to the main broadcast. In this case, with a value of "1", the ad content will appear once in the broadcast and replace a certain segment of the broadcast. With a value of 1/2, the content will be shown once in every two full broadcast cycles, replacing a certain segment in the first broadcast.
