Обновленное отображение настроек контента в зоне трансляции/en: различия между версиями

Материал из SmartPlayer
(Новая страница: «==== '''"Zone" Block''' ==== In the "Zone" block, the following parameters are available for the user to configure: * List of zones * Left margin (can be manually set or left at the default value) * Top margin (can be manually set or left at the default value) * Checkbox for enabling automatic calculation of the content playback time * Checkbox for activating the content looping mode in the zone * Playback order File: Блок_зона.png|thumb|center| Ex...»)
(Новая страница: «==== '''"Content Playback Conditions" Block''' ==== In the "Content Playback Conditions" block, the following parameters are available for the user to configure:<br> '''For a configuration file in ".xml" format:''': * Select the path to the configuration file * XML node name * Condition (two types available: "empty string" and "equals") * Value (two types available: "Yes" and "No") File:Условия_воспроизведения_контента.png|thu...»)
Строка 46: Строка 46:
* Animations (a separate block, the settings for which can be found on the [[Animations in SmartPlayer]] page)
* Animations (a separate block, the settings for which can be found on the [[Animations in SmartPlayer]] page)
[[File: Блок_настройки_контента.png|thumb|center| Example of the "Content Settings" block |800px]]  
[[File: Блок_настройки_контента.png|thumb|center| Example of the "Content Settings" block |800px]]  
<div lang="ru" dir="ltr" class="mw-content-ltr">
==== '''"Content Playback Conditions" Block''' ====
==== '''Блок "Условия воспроизведения контента"''' ====
In the "Content Playback Conditions" block, the following parameters are available for the user to configure:<br>
В блоке "Условия воспроизведения контента" пользователю доступны к настройке следующие параметры:<br>
'''For a configuration file in ".xml" format:''':
'''Для файла конфигураций в виде ".xml"''':
* Select the path to the configuration file
* Выбор пути к файлу конфигурации
* XML node name
* Имя xml узла
* Condition (two types available: "empty string" and "equals")
* Условие (доступно два типа: "пустая строка" и "равно")
* Value (two types available: "Yes" and "No")
* Значение (доступно два типа: "Да" и "Нет")
[[File:Условия_воспроизведения_контента.png|thumb|center| Example of the "Content Playback Conditions" block for a ".xml" configuration file |800px]]
[[File:Условия_воспроизведения_контента.png|thumb|center| Пример отображения блока "Условия воспроизведения контента", если конфигурационный файл в ".xml" |800px]]
'''For a configuration file in ".csv" format:''':
'''Для файла конфигураций в виде ".сsv"''':
* Select the path to the configuration file
* Выбор пути к файлу конфигурации
* Column
* Столбец
* Row
* Строка
* Value (two types available: "Yes" and "No")
* Значение (доступно два типа: "Да" и "Нет")
[[File:Вариант_csv.png|thumb|center| Example of the "Content Playback Conditions" block for a ".csv" configuration file |800px]]
[[File:Вариант_csv.png|thumb|center| Пример отображения блока "Условия воспроизведения контента", если конфигурационный файл в ".csv" |800px]]
== '''Video Tutorial''' ==
== '''Видеоинструкция''' ==
[https://www.youtube.com/watch?v=RafQfWDjIs8 Updated content settings design in the broadcast section]
[https://www.youtube.com/watch?v=RafQfWDjIs8 Обновленный дизайн настроек контента в разделе трансляции]
== '''Final Result''' ==
== '''Итоговый результат''' ==
Users understand and know how the changed interface for interacting with content in the "Broadcasts" section works, and can interact with it correctly.
Пользователи знают и понимают, как работает изменившийся интерфейс взаимодействия с контентом в разделе "Трансляции", а также могут с ним правильно взаимодействовать.
</div>

Версия от 11:37, 26 июня 2024

Situation Description

The SmartPlayer platform is constantly evolving and updating. In this article, users can familiarize themselves with the design changes in the "Broadcasts" section, specifically the block related to content settings. This information will help users get accustomed to the new display of elements and the styling in the "Broadcasts" section.

Principle of Operation

To try out the new design of the "Broadcasts" section, users will first need to enable it in their personal account. This can be done through the "Settings" section of the personal account by navigating to the "Broadcast Editor" category. By default, this category is set to display broadcast parameters as a dropdown list. However, users can now change the display to show it as separate tabs in the toolbar.

Example of the old and new toolbar design for content settings

Смена отображения меню в тулбаре

To apply the new design and view content settings as tabs, the user needs to log in to their personal account and navigate to the "Settings" section.

Example of the "Settings" section in the user's personal account

The next step is to select the "Broadcast Editor" category from the list of settings.

Example of the "Broadcast Editor" category in the user's personal account

Within the category, the user needs to switch the toolbar display parameter from "Dropdown List" to "Tabs."

Example of the toolbar display options section

After doing this, when creating a broadcast with content, the user will see the changes in the toolbar and will be able to interact with content settings displayed as tabs more easily.

Настройки контента в трансляции

After switching the display mode in the settings, the user needs to create a broadcast, highlight a zone, and select the content they want to play on the device. Once the content is moved to the zone, the user needs to click on the content in the zone to open the toolbar with content settings in the broadcast. This toolbar will have three main settings blocks available:

  1. Zone
  2. Content Settings
  3. Content Playback Conditions
Alternative display of content settings

"Zone" Block

In the "Zone" block, the following parameters are available for the user to configure:

  • List of zones
  • Left margin (can be manually set or left at the default value)
  • Top margin (can be manually set or left at the default value)
  • Checkbox for enabling automatic calculation of the content playback time
  • Checkbox for activating the content looping mode in the zone
  • Playback order
Example of the "Zone" block

"Content Settings" Block"

In the "Content Settings" block, the following parameters are available for the user to configure:

  • Content storage view
  • Selected advertising content
  • Start time
  • Duration
  • Layer level
  • Playback frequency
  • Left margin (can be manually set or left at the default value)
  • Top margin (can be manually set or left at the default value)
  • Width (can be manually set or left at the default value)
  • Height (can be manually set or left at the default value)
  • Animations (a separate block, the settings for which can be found on the Animations in SmartPlayer page)
Example of the "Content Settings" block

"Content Playback Conditions" Block

In the "Content Playback Conditions" block, the following parameters are available for the user to configure:
For a configuration file in ".xml" format::

  • Select the path to the configuration file
  • XML node name
  • Condition (two types available: "empty string" and "equals")
  • Value (two types available: "Yes" and "No")
Example of the "Content Playback Conditions" block for a ".xml" configuration file

For a configuration file in ".csv" format::

  • Select the path to the configuration file
  • Column
  • Row
  • Value (two types available: "Yes" and "No")
Example of the "Content Playback Conditions" block for a ".csv" configuration file

Video Tutorial

Updated content settings design in the broadcast section

Final Result

Users understand and know how the changed interface for interacting with content in the "Broadcasts" section works, and can interact with it correctly.