Philips

Description

Professional panels Philips and commercial TVs with built-in player based on Android OS.

Supported devices

Devices with OS Android 5+

For clarification on specific models, send a request to tech@smartplayer.org

Initial setup

For commercial screens model 43HFL5011T / 12

1. If necessary, initially set up the TV (choice of language, region, etc.). It is not mandatory, but the menu shall be at least in English.
2. After starting the TV, enter the combination 319753 mute from the remote control. The service menu will open.
3. In the service menu, you need to configure the Internet.
4. In case of Ethernet, RJ-45 input
5. When connecting via Wi-Fi in the service menu, go to the item Wireless and Networks - Connect to Network - wireless and connect to an available network.
6. Download the archive using this link and unpack it to the root of the usb flash drive.
7. Insert the USB drive into the usb port at the back of the panel.
8. In the service menu, go to Upgade and Clone - Clone USB to TV, the installation of the application from the flash drive will start, when finished, click Close
9. Setting the application autostart: Switch On settings - Feature Settings - App - Smart Player, you need to confirm the Smart Player selection
10. After rebooting the screen, the application will automatically start

Для профессиональных экранов модели 42BDL5055P

1. Скачать и записать на USB флешку приложение SmartPlayer
2. Вставить USB флешку в порт панели
3. При первоначальном запуске экрана, необходимо настроить на нем интернет и время
4. Набрать комбинацию на пульте HOME + 1888, экран перейдет в инженерное меню
5. Перейти в пункт Apps

1. Далее File Manager

1. Находим папку mnt

1. Далее usb_storage

1. Мы переходим в память флешки, находим там приложение SmartPlayer

1. Устанавливаем приложение SmartPlayer. После установки приложение запустится автоматически