Translations:Linux/11/en

Материал из SmartPlayer
Версия от 13:51, 13 сентября 2024; N.Bloshkin (обсуждение | вклад) (Новая страница: «== Exiting Kiosk Mode == The application will start in kiosk mode. To exit, use the keyboard shortcut Ctrl+F12. == Removing the Application == Run the following command in the terminal: '''$ sudo dpkg --purge SmartPlayer''' == Running on Low-End Hardware == When running on computers with low specifications, video freezing and lagging may occur. To achieve better performance, you need to: # Upload the video to the built-in video editor in your personal acc...»)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)

Exiting Kiosk Mode

The application will start in kiosk mode. To exit, use the keyboard shortcut Ctrl+F12.

Removing the Application

Run the following command in the terminal: $ sudo dpkg --purge SmartPlayer

Running on Low-End Hardware

When running on computers with low specifications, video freezing and lagging may occur. To achieve better performance, you need to:

  1. Upload the video to the built-in video editor in your personal account, adjust the video bitrate in the editor to an appropriate level (depending on the required quality), process it, and save it. Use the processed video in the broadcast.
  2. In the personal account, go to the device settings and enable hardware acceleration. Settings - Hardware acceleration - enter the parameter
file-caching=3000 and save.

Troubleshooting

The display does not turn off when the display timeout is set

To resolve the issue, first run the following command in the device's command line: xset dpms force off. If the display turns off, incorrect settings are configured in the SmartPlayer personal account. If the display does not turn off and the message server does not have extension for dpms option appears in the command line, you need to adjust the settings. The solution requires disabling Wayland in Ubuntu:

  1. Run the command sudo nano /etc/gdm3/custom.conf
  2. Remove the comment from the line #WaylandEnable = false (the text will be highlighted in white).
  3. Save (ctrl+O)
  4. Run the command sudo service gdm3 restart

Example