Translations:WebOS Signage/10/en

Материал из SmartPlayer
Версия от 12:50, 17 сентября 2021; Admin (обсуждение | вклад)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)

3. USB installation of the application using a USB stick and scap_installation.json file

3.1 Preparing flash storage (USB flash drive)

  1. Format the flash drive to NTFS format
  2. Put the file scap_installation.json in the root of the flash drive

3.2 Preparing the device

  1. If the device has been used before, make it a factory reset. If the device has not been used before, skip this step.
  2. Connect the device to the network via RJ45 with Internet access, in other words, insert the Internet cable into the device connector.
  3. Insert the USB flash drive into the USB connector of the device, prepared in paragraph 3.1
  4. Turn on the device from the control panel by pressing the tap button or on in the monitor section

3.3 Installing the application

  1. Do nothing, the device will reboot once and show the registration code in the SmartPlayer platform. Submit to https://cms.smartplayer.org/ and register your device for further work.
  2. Remove the USB flash drive from the device's USB connector
Источник — https://wiki.smartplayer.org/index.php?title=Translations:WebOS_Signage/10/en&oldid=4656