ContentStream

Description

Description of streaming media (video and sound)

General guidelines for creating a stream

1. Configure the stream using the H264 codec, an example of settings from the device that sends the stream.

2. If the RTP stream does not play correctly (audio or video), try playing the stream using a different protocol. As a rule, the device that generates the stream always gives several types of stream. HLS stream can play more stable than RTP / RTPS. RTSP is not required within the digital signage market, since this protocol only adds flow control (play, pause, rewind), as a rule, these functions are not needed when the stream is played on a 24/7 device and does not require control.
3. First try to play the most primitive stream, namely UDP.
4. If you are sure that everything was done correctly, run the test application to play only the stream. After installation, enter the test stream into the field and check its playback.

Operating system	Test application	Test application UI
WebOS 2/3/3.2/4/4.1	http://sa2.org/w/tests/stream.ipk

Supported by SmartPlayer client applications by operating system

Платформа	HLS	RTP/RTSP	SmoothStream	DASH	UDP	YouTube	HTTP
Linux	Да	Да	Да	Нет	Да	Да	Да
Windows	Да	Да	Да	Нет	Да	Да	Да
WebOS	Да	Да	Неизвестно	Неизвестно	Да	Да	Да
Android	Да	Да	Нет	Нет	Да	Да	Да
Tizen	Да	Да	Да	Да	Да	Да	Да
Orsay	Нет	Да	Нет	Нет	Да	Нет	Нет
ProCentric	Неизвестно	Неизвестно	Неизвестно	Неизвестно	Неизвестно	Неизвестно	Да

О потоковой передачи данных

Потоковая передача	Разрешение ссылки	Префикс ссылки	Дополнительное описание
HLS	.m3u8	http(s)://	wikipedia
RTP/RTSP	-	rtp:// rtsp://	wikipedia
SmoothStream	.ism Manifest	http(s)://	wikipedia
DASH	.mpd	http(s)://	wikipedia
UDP	-	upd://	wikipedia
HTTP	.html	http(s)://	Пример: https://www.1tv.ru/iframed/eump-embedlive.html

Тестовые потоки : http://vlctest.eu5.net/