Latest Samsung firmware

Firmware list http://wiki.smartplayer.org/index.php/Integrations

After installing the firmware, it is strongly recommended to do a factory reset (the firmware will not be rolled back), for this, from the off state, dial the combination `` mute-1-8-2-PowerOn on the remote control. In the service menu that appears, select Option -> Factory Reset -> Factory Reset.

How to update

USB upgrade

1. The USB stick must be in FAT32 format, all extraneous files must be removed
2. Unpack files from the archive with the firmware (image folder) to the "root" of the flash drive
3. Connect the drive to the USB port on the panel
4. Enable panel
5. In the menu go to Menu> Support> Software Update (Menu> Support> Software Update)
6. When a question arises about searching for firmware on USB, select "Yes"
7. After the installation is complete, make sure the firmware is up to date. The System> Support> Contact Samsung tab should display the new firmware version.

Downgrade Firmware Using USB

1. The USB stick must be in FAT32 format, all extraneous files must be removed
2. Obtain from a SmartPlayer representative a zero firmware for a specific device model
3. Unpack files from the archive with the firmware (image folder) to the "root" of the flash drive
4. Connect the drive to the USB port on the panel
5. Enable panel
6. In the menu go to System> Support> Software Update
7. When a question arises about searching for firmware on USB, select "Yes"
8. After installing zero firmware, restart the device
9. After rebooting, take the firmware of the required version and update as described in the paragraph " Updating via USB "